Third Party Databases
Very useful for small boats and yacht products
Focused more on services and shipyards rather than products.
Well rounded site with numerous vendors, organized by product type.

DMS Vendors
Vendors that DMS collected through years of working in the maritime industry . . .
Aalco is based in the UK, and one of their largest mult-metal stockholders. Call these guys when you need structural materials. Their website includes a material search engine and dozens of data sheets for mechanical properties of numerous different metal types. Their website even includes structural brochures specific to marine use. Aalco offers the following categories of structural members: You can find plenty of information on the company’s website: Details of their products are here: http://www.aalco.co.uk/products/general.aspx Data sheets are available here: http://www.aalco.co.uk/datasheets/ Contact information depends on your location. Aalco includes a handy map to locate the nearest office: Need an azipod? They are ship propulsors driven by electric motors, mounted external to the hull. The entire motor azimuths. This allows you to develop maximum thrust in any direction and offers great vessel maneuverability. ABB offers azipods in several different sizes Taken from ABB Website: The improved fuel efficiency of the Azipod propulsion is based on the optimum water flow to the propellers due to pulling propellers. Compared to the normal shaft line vessel the improvement in hydrodynamic efficiency can be up to 15 % depending on the application. Due to azimuthing thruster principle the Azipod vessel has an excellent manoeuvrability characteristics. This improves the vessel safety but as well minimizes the harbour manoeuvring time and can in some cases may eliminate the need of harbour tug assistance. The azimuthing electric propulsion has proved to be the most efficient propulsion system in ice breakers. Further with Azipod it is possible to build ice going cargo vessels, which can operate without ice breaker assistance. Azipod propulsion is based on electric propulsion concept where generator sets can be freely located to the vessel. Further many systems inside the ship hull (propulsion motors, long shaftlines,stern thrusters and rudders) are not needed. This gives a lot of freedom to the ship design and construction. Space can be saved inside the vessel which can be used for extra payload or even may make it possible to build a smaller ship. From shipbuilding poit of view a lot of installation hours can be saved due to simpler construction. Azipod product family includes the following products – Azipod CO: Open water applications up to 4.5 MW – Azipod XO: Open water applications up to 20 MW – Azipod CZ: Thruster unit for high thrust applications, 4.5 MW – Azipod VI: Ice going ship applications for different ice classes – Azipod XC: Azipod for Contra Rotating applications You can find more information about azipods on ABB’s website: http://www.abb.com/industries/db0003db002805/c12571f4002ab83dc1256fdf003b2929.aspx For more information on ABB in general, go to their general website: You can find full contact details for each country on ABB’s website: The following contact information is specific to U.S.A. Name: Antti Lehtela Phone: +35 810 222 2859 Fax: +35 810 222 2350 Address: ABB Oy Merenkulkijankatu 1 00980 Helsinki AEG Industrial Engineering is a company for electrical plants of the industry, the energy industry and transportation. We are located at the traditional location of AEG industrial facilities, the Hohenzollerndamm in Berlin. We are in close contact with current and former AEG factories. The main focus of our works are drive and automation systems, switchgear, transformers, generators / turbines and diesel generator sets. We also deal with general industry electronics and high and low voltage compensation systems. Together with our representatives and our local subsidiaries, we serve our international clients. We supply spares and new equipment to our clients. We consult, design and supply for new equipment and revamp existing plants. Many of our engineers are familiar with industrial plants, ship technique and power plants supplied by AEG in the past. We deliver devices and systems make the start up of the equipment and take care until production starts. If customers need consulting services for economizing energy in large drives for pumps and fans, we can help. Our after sales service, inspections and repairs of AEG components like Kanis turbines, transformers, switchgear or other devices help customers to run and stabilize their production plants. Together with our partners we can deliver complete compact steelworks including scrap sorting and the electric arc furnace EAF and LF. Where required, we can also provide rolling mills for the production of construction steel or profiles. Our know how covers all applications for speed and non-speed controlled drives. We design, deliver and put into operation: We are experienced in the saving of energy and give advice in case of revamping or optimization of existing plants. Despite the name, Alaskan Copper and Brass offers more than in the way of structural materials, beyond just copper and brass. They have stock of structural materials in the USA and Canada. They make products in several categories. You can find more information about Alaskan Copper and Brass here: You can also find their stock list (USA) here: http://www.alascop.com/pdf/US_StockList.pdf The company has contact information for several regional offices. You can find full details of contact information on the company website: http://www.alascop.com/contact.php 27402 72nd Avenue South P.O. Box 5067 P.O. Box 8236 225 North Road Alfa Laval does heat transfer, fluid separation, and fluid handling. They have a global presence, with offices in numerous countries. Highly efficient and durable heat exchangers for any heat transfer application. Solutions that optimize energy utilization while minimizing downtime. Separate fluids, solids and gases with outstanding precision and low running cost. Based on proven technology with a reputation for reliability in industries such as food, pharma, chemical, oil and wastewater treatment. You can find more information on their website. Visit the website for a full list of contacts http://www.alfalaval.com/contact-us/pages/contact-us.aspx#letterU SMART Automation AS (part of Align) provides automation and control systems for whole vessel integration. Control you engine, your pumps, everything integrated through a single digital control system. From company website: Smart Automation AS supplies integrated automation systems for shipyards and ship-owners. Several thousand vessels are sailing with our smart solutions. We supply products and know-how on the global market, and are heavily engaged in newbuildings and rebuilding projects (retrofit). Our SMARTChief® product solutions integrate all functions in a user friendly way, and comply with the regulations and notations of all major classification societies. You can find full details of all products on the company website. This just provides a summary. The SMARTChief® II is a fully scaleable screen based alarm and control system with a range of design and operational benefits. It displays an extensive overview of the vessels functions including AMS, Pump Control, Valve Control, Tank Sounding, PMS control, CCTV, Fire alarm and other seamless integrations subject to the vessels configuration. The SMARTChief® II is approved by all major classification societies. SMART Link™ is a direct link to your vessel, which empowers us to service or check the SMART Chief® II wherever you are in the world, as long as you have a working connection. The SMARTChief® Power Management is designed for all kind of applications and complies with all major classification societies rules. The SMARTChief® Power Management System (PMS) is well proven, complete system, adaptable to control any plant combining engine generators (diesel, heavy fuel, gas, steam) and fixed-frequency generators (shaft or turbine-driven). The SMARTChief® PMS may include input for external supply (emergency or harbour generator, shore connection, public mains). The easy-to-use-program enables you to control the system in relaxed confidence. Simple menu selection and procedures assure fast and safe setting of parameters and access to all essential data on the operator panel. The SMARTChief® Tank Level Management offers reliability, accuracy and flexibility in cargo loading, tank monitoring and unloading. Easy installation, operation and maintenance are key factors in our system. You can find full details of all products on the company website: http://www.align.no/en-GB/The-Companies/Smart-Automation-AS/ You can find contact details on the company website: http://www.align.no/en-GB/The-Companies/Smart-Automation-AS/Contact/ Smart Automation AS Hollundsdalen Ind. Park Phone: + 47 53 42 88 03 E-Mail: mail@smartautomation.no Anixter is a leading global supplier of communications and security products, electrical and electronic wire and cable, fasteners and other small components. The bits and bobs, the nuts and bolts (literally). A large number of their products are oriented towards electronics versus power distribution of electricity (think communications instead of power grid). However, they still have a large set of products for simple wire and cable. Here is the list of general product categories they carry. The company’s website: http://www.anixter.com You can find contact information on the company’s website: http://www.anixter.com/north-america/us/en/about-us/contact-us.html 7400 Security Way Houston TX 77040 USA ASCO provided aluminum and some other forms of corrosion resistant metals. Aluminum Supply Company, Inc. (ASCO) is a second-generation, family-owned business based in Detroit, Michigan. Since 1948, we have built an impeccable reputation by consistently providing quality materials and exceptional service to our customers. They provide several forms of material products. ASCO aluminum primarily provides aluminum. They also offer a few other material options. You can find more details on the company’s website. Contact information is located here: http://www.aluminumsupply.com/contact.php Toll Free Phone: +1 (800) 899-2726 Ballast Technologies provide fixed ballast installations. We often used fixed ballast to correct stability problems with vessels. Permanent ballast should be easy to install with minimum labor. Of course, it must have significant weight. Ideally, we also prefer to customize the density of the ballast and ensure we completely fill a compartment. The following information comes from the company website. Perma Ballast® is high density fixed ballast used throughout the world for Ships, Boats, Floating and Gravity Based Production Platforms, Bridges and Counterweights Perma Ballast® is lead-free, non-toxic, non-corrosive, chemically inert, and environmentally safe, often incorporating iron ore such as magnetite or QCM. Perma Ballast® will not cause gases or vapors to be generated, even after many years of service. Perma Ballast® is thoroughly tested in BTI’s laboratories to ensure proper density, uniformity and stability. BTI also performs continuous onsite quality controlduring installation. Perma Ballast® is avalable in a wide range of installed densities, from 130 lbs/ft3 – 325 lbs/ft3 (2.1 – 5.2 metric tons/m3). Perma Ballast® is removable and reusable. Perma Ballast® is recognized and accepted by certifying and regulatory agencies around the world, including ABS, Bureau Veritas, U.S. DOT, U.S. Coast Guard, Lloyd’s Register, Germanischer Lloyd, and Det Norske Veritas. Perma Ballast® specialists make a site visit to inspect the vessel and installation location and then draft customized operating and safety plan. Perma Ballast® is installed by BTI’s experienced personnel using state-of-the-art equipment for safe, rapid and efficient mobilization, installation and demobilization. To minimize inconvenience to our customers, BTI pumps from dockside and offers the option of continuous installation, 24 hours per day, 7 days per week. Perma Ballast® is engineered to ensure even distribution throughout all available tank space. Perma Ballast® consolidates as it is installed. The result is non-shifting fixed ballast that remains removable and reusable. Sometimes, we need to add ballast to an existing ship, usually to maintain ship stability. But the logistics of putting a lot of weight into unused sections of a ship can be fairly daunting. And then the weight must be safely secured. Ballast-crete offers a labor-saving alternative to traditional ingot ballast. Ballast-Crete® is a pre-blended combination of water and inorganic, non-toxic, granular and ground fines that can be produced in density ranges of 130 lb. (S.G. 2.08) to 325 lb. (S.G. 5.21) per cubic foot, or higher. During installation, its flowability and water retentiveness compares to a ready-mix mortar although it does not contain portland cement. After installation, Ballast-Crete® firms to a semi-solid mass. Ballast-Crete® is designed to meet U.S. Coast Guard, U.S. Navy, American Bureau of Shipping and Det Norske Veritas & Bureau Veritas specifications. Due to its thixotropic nature, Ballast-Crete® can be removed in discrete quantities for the repair or modification of your ship. Further details can be found on the company website. You can find full contact information on the company website: http://www.ballast-crete.com/Contact_Us.html Robert L. Chester, P.E. President Cell: +1 443 504-9876 Fax: +1 410 557-9058 Email: Bchester.bct@verizon.net For a proposal, please provide the following: – Name and Type of vessel. – Shipyard or port for fixed ballast installation. – Approximate timeframe for installation. – Fixed ballast tanks’ identifications and capacities. – Required fixed ballast tonnage and density. – A drawing of the fixed ballast tank tops will allow us to identify fill and vent openings’ locations for installation. Beacon Finland makes the JAK coupling system for articulated tug barges (ATB). The coupler allows pitch degree of freedom and can connect at different draft levels between barge and tug. From company website: The JAK® ATB Coupling System of Beacon Finland is invented and developed especially for use on Articulated Tug Barge (ATB) systems. It is a modern innovation with significant advantages with regard to space, weight and cost. The original invention was made in 1991. Since then, Beacon Finland has continued to develop it into a very competitive product for the ATB market. The basic idea of the invention was to improve the existing connection devices between the tug and the barge in the ATB-system with the aim of a lightweight, safe, simple and cost effective coupling. The JAK®-ATB Coupling System solved the conventional problems and fulfilled the basic targets more than well. The main product is the JAK coupling. From company website: The JAK®-ATB Coupling System is a pneumatically actuated electrically controlled articulated tug-barge connecting system. The coupling action is controlled from a control panel on the vessel’s bridge or/and from the local control panel in the coupler unit compartment. The efficiency and the reasonable cost of the coupling device are based on its simple construction. There are also several other benefits of this system, e.g.: You can get more information on the company website: http://www.beaconfinland.com/jak-coupling/ You can find local contact information on the company website: http://www.beaconfinland.com/contacts/ Beacon Finland Ltd Oy Contact: Mr. Timo Rintala Phone: +358 2 8387 9500 Ian-Conrad Bergan provides tank gauging systems for tank barges and ocean going tankers. They specialize in applications for petroleum cargo and other hazardous or noxious products. All the situations that make tank gauging difficult or deadly: Ian-Conrad Bergan may have a solution. From company website: We are the original pioneer in tank gauging having developed the first ultra reliable liquid level overfill protection system trademarked as the Guard Level� system. Our experience covers all types of oil/chemical/products including high temperature applications such as asphalt carriers. All of our systems are certified as Intrinsically Safe and are approved by the major classification societies. The systems we sell ensure safe operation on ships and barges and are a vital part in protecting the environment. Our philosophy is to provide simple and reliable equipment that lasts for the life of the vessel. The Cargo Management System (CMS) in tandem with our proprietary CargoRadar� and Guard Level� range of sensors, provides for the best accurate level, ullage and volume measurement and will allow you to load and transport cargo in a safe and cost effective way. We have recently introduced several new products. The Fuel Management System (FMS) is unique in the industry and gives unprecedented accuracy. It is a valuable tool to ship/tug crews during bunkering and can usher in improved fuel efficiencies. Due to its networked architecture, fleet-wide fuel monitoring in a cost effective way is made possible. Our new line of manual valve control registered as Guard Valve� offers valuable benefits on vessels with local valve control. Our 35 year track-record is unrivaled and long term support is assured. We stand by you with great service; before, during and long after the sale. It is a privilege to have you as our customer. There are an extensive array of products on the company website. This just lists the major tank gauging systems they offer. You can find more information on the company’s website: To contact Bergan, you can find details on their website: http://www.bergan-blue.com/old/contact.html Or use the contact information below: Phone: +1 850 434 1286 Administration: administration@icbergan.com Sales: sales@icbergan.com Engineering: operations@icbergan.com Service: service@icbergan.com Bosch-Rexroth specialized in industrial hydraulics and controls, with experience applying this skill to the the field of towing tanks. This also includes electric drives. (Basically, all the components you need for an industrial towing tank.) They can supply a wide range of products related to towing tanks. Typical wave generator solutions that can be developed by Bosch Rexroth are: The systems are fatigue rated and designed with low noise production, a long lifespan and high serviceability (low maintenance and ease of access) in mind. To ensure high motion accuracy the systems encompass: The height of the waves that can be generated is limited by water depth, wave steepness, overtopping and maximum segment stroke and velocity. Electric Drives and Controls 5150 Prairie Stone Parkway Hoffman Estates Illinois 60192-3707 United States of America Founded in 1972, Bruce Anchor is a leading designer and supplier of drag-embedment anchors and associated equipment to the Oil & Gas and Offshore Renewable Energy industries for various applications. Our continuous investment in Research and Development helps us to provide innovative, cost effective mooring solutions that support our customers with their requirements. This is the only drag embedment anchor capable of accepting directional changes of loading from all headings. After installation, the Bruce Omni-Directional Dennla can embed in the rearward direction as well as the forward direction by veering into alignment with the direction of loading. Developed in 1986, the Bruce FFTS Mk4 anchor is still one of the only drag embedment anchors available on the market that completely satisfies the HHP anchor rules regarding self righting as set out by DNV GL. With increased holding capacity and the cranked shank design, the Bruce FFTS PM is the perfect anchor for permanent mooring requirements and hard bottom conditions. The Bruce FFTS GP has a further increased fluke area from that of the Bruce FFTS PM, and the shank straightened to enable mass to be redistributed to the fluke for higher holding capacity and a lower rearwards recovery load. Carlsen provides equipment and engineering services for bulk material handling. Cement, sand, and even grains. Carlsen has the equipment to efficiently and safely unload it. Carlsen offers a variety of different systems for bulk cargo handling. Which system to select can depend on many things: efficiency, the specific cargo to handle, safety. Carlsen representatives can help you select the best system for your purposes. All text taken from Carlsen website. (http://www.carlsengroup.com) The D.R. (Double Reloader) system consists of two tanks that alternate between being filled by vacuum and emptied by pressure. When the first reloader tank is full, the vacuum valve closes, and the vacuum valve to the second tank open. The second tank is then filled while at the same time the first tank is emptied to recieving silos by means of compressed air. In this way a nearly continous conveying process is achieved. The Carlsen mechanical system uses screw conveyors for vertical conveying and airslides or horizontal screw conveyors for horizontal converying The holds are equipped with fluidized bottoms. The material flows from the fluidized bottom through a flow control gate into a vertical screw converyor. From the vertical screw conveyor on deck to the centre of the ship. The material is conveyed on shore either by a mechanical unloading boom or by a pneumatic pressure system. The Carlsen E3 Cargo System provides almost continous unloading to shore, it is utilizing the pressure from compressors and direct feeding from the hold to the blow tanks. The advantage is that the system uses only one conveyor from cargo hold to silo. All the Conveyor Loading systems (Air slide Loading System & Screw Conveyor Loading System) can be provided with the following options. You can find more information on the company website: Detailed contact information can be found on the company website: http://www.carlsengroup.com/contact/ Carlsen Group Phone: +31 180 440 720 Cathelco provides impressed current systems to prevent corrosion of hull plating, pipework antifouling, and a variety of other products. The following description comes from Cathelco’s website (http://www.cathelco.com) Cathelco are world leading designers and manufacturers of equipment for ships and offshore installations. Cathelco supply AF and ICCP systems for offshore platforms, semi-submersibles, FPSOs and FSOs. In the renewable energy market they have developed advanced ICCP systems to protect monopile, jacket and tripod offshore wind turbines. After considerable research and development, Cathelco are planning to launch a unique ballast water treatment (BWT) system in 2013 based on a combination of filtration and UV sterilisation. Cathelco are represented globally through a network of agent/installers. Although modern hull coatings provide some protection against corrosion they do not offer a complete solution. For this reason, most operators choose to protect their vessels with a purpose designed impressed current cathodic protection system. Using an arrangement of hull mounted anodes and reference cells connected to a control panel(s), the system produces a more powerful external current to suppress the natural electro-chemical activity on the wetted surface of the hull. This eliminates the formation of aggressive corrosion cells on the surface of plates and avoids the problems which can exist where dissimilar metals are introduced through welding or brought into proximity by other components such as propellers. An essential feature of ICCP systems is that they constantly monitor the electrical potential at the seawater/hull interface and carefully adjust the output to the anodes in relation to this. Therefore, the system is much more effective and reliable than sacrificial anode systems where the level of protection is unknown and uncontrollable. Cathelco has ample samples and useful information on their website: You can find detailed contact information for Cathelco on the company website. Cen-Tex marine creates watertight closures. We need to keep the water out somehow, and Cen-Tex has solutions for you. From company website: The full product catalog is on the company website. This just lists the major categories. You can find more information on the company website: Address: Cen-Tex Marine Fab. Phone: (512) 237-2496 Fax: (512) 237-3257 E-MAIL: MARINE CLOSURES CIP Composites offer design engineers an attractive, cost effective alternative to the traditional materials used for bushings, bearings, wear pads, and thrust washers, such as bronze or nylon. CIP Composites are only 1/6 the weight of steel, easily machined, have good dimensional stability and do not contain harmful or toxic materials. Columbia Industrial Products (CIP) is dedicated to providing you with the highest quality composite bearing materials in conjunction with superior customer service. CIP is committed to building sustainable relationships that you can rely on. From quick quotes to short lead times, we are a custom manufacturing house in business specifically to serve and solve bearing and wearing challenges. We build honest personal relationships that start from the first inquiry and extend beyond the shipment of the order. We believe…our success depends on your success. For the last 22 years we have been manufacturing self-lubricating composite bearings and wear material for the marine, hydro, and other industrial markets. For the last 22 years we have been manufacturing self-lubricating composite bearings and wear material for the marine, hydro, and other industrial markets. In marine our parts service everything below the water line – stern tubes, rudders, fin stabilizers and thrusters. Above the water line it’s the bearings for deck equipment- tow pins, winches, fairlead rollers, hatch covers, actuators & doors . We are well known for our fast lead times, ability to produce some of the largest sizes in the industry, and our personalized customer service. If for some reason your email blocks you from opening attachments you can also see our catalog and application pages on the website linked above. 29538 Airport Rd, Unit A Eugene OR 97402 USA Columbia Winch and Hoist creates small to medium sized winches for material handling. Think of moving a large engine block around the shop floor. Columbia products are manufactured by Allied Power Products, Inc. (http://www.alliedpower.com) Columbia Winch and Hoist offers a variety of products. A load strap drum option is offered for every standard model of Columbia winch and hoist. With hoist capacities to 5,600 lbs. and winch capacities to 11,000 lbs., Columbia strap drum models provide versatile load handling capability while eliminating the inherent disadvantages of wire rope or chain. In addition to being easier to handle, inspect and install, straps eliminate load rotation problems associated with wire rope and chain. Unlike wire rope, straps wind smoothly without long lead distances to the drum. Straps do not require lubrication nor do they “jagger”, chip or spark. For line pull and line speed performance, refer to the appropriate Columbia winch or hoist technical specification sheet. You can find more details about Columbia Winch and Hoist on their website: 6590 SW Fallbrook Place Email: Internet form: http://www.columbiawinch.com/contact.html ComAp manufacturers control systems for gensets, pumps, and propulsion engines. The number of features you get from their small boxes is really quite remarkable. You can also got the company website and download the configuration software for their boxes for free. Gives you a chance to play around and see what the control system is capable of before purchasing. The software does not require a link to the box to function. You can see the full list of products on the company website. (Link provided in contact information.) This description is an example of the features you can expect from a ComAp system. This is for the base control unit on their InteliGen NTC genset controller. InteliGen NTC BaseBox is a comprehensive gen-set controller for both single and multiple gensets operating in standby or paralleling modes. The detachable modular construction allows easy installation with the potential for many different extension modules designed to suit individual customer requirements. To be used in conjunction with detachable colour displays InteliVision 5 or InteliVision 8 Support of engines with ECU (Electronic Control Unit) Complete integrated gen-set solution and signal sharing via CAN bus – minimum external components needed Many communication options – easy remote supervising and servicingAutomatic synchronizing and power control (via speed governor or ECU) AMF function, Baseload, Import / Export, Peak shaving, Voltage and PF control (AVR) Generator measurement: U, I, Hz, kW, kVAr, kVA, PF, kWh, kVAhr Mains measurement: U, I, Hz, kW, kVAr, PF Selectable measurement ranges for AC voltages and currents – 120 / 277 V, 0–1 / 0–5 A Inputs and outputs configurable for various customer needs Bipolar binary outputs – possibility to use BO as High or Low side switch Controller redundancy Event-based history (up to 1000 records) with customer-selectable list of stored values; RTC; statistic values Integrated PLC programmable functions Integrated fixed and configurable protections DIN-Rail mount Main company website: ComAp works through a network of distributors. You can find their distributors listed here: http://www.comap.cz/distributors/country-index/ For direct contact with ComAp, go here: http://www.comap.cz/company/contact/ Competition Composites Inc. (CCI) has been serving the global sailing and composites communities since 2002. From our early beginnings as Phil’s Foils marine products, we have expanded to offer design and fabrication services across many fields of composites application. CCI offers quality and reliable products and services you can count on, from one-off custom development to short run production. Our friendly and professional staff are here to answer any questions you may have about your needs, our company or our services. CCI is ISO 9001:2015 Certified and Controlled Goods Certified. We have been designing and building marine foils and products since 2002 as Phil’s Foils. We have hundreds of satisfied and repeat customers and our products are race and regatta winners around the globe. We have an extensive design portfolio addressing many popular classes of multi-hulls, keel boats and dinghies, but if you don’t see what you need, we also offer comprehensive design and construction services and advice. CCI has always been an innovator, and now we are turning our attention to building high quality structural tubes using our proprietary processes. Usually in carbon fiber, but we can work with other materials as well. In 2014 we added autoclave capability to our shop, with a 12″ diameter, 20′ long heated pressure vessel. Our composite tillers are something quite special as they are light, strong and look the part too. We can design and build to your exact specification, and here are some examples of work already done. Corvus Energy makes batteries and other forms of electric power modules. Corvus Energy (http://www.corvus-energy.com/) This battery can store up to 6.5 kWh in a single battery. Features include: Full contact information available on company website. http://www.corvus-energy.com/contact.html Corvus Energy Canada Unit 220, 13155 Delf Place Corvus Energy USA Seattle, WA Corvus Energy Africa 8th Floor, The Octagon Corvus Energy South East Asia 2 Tuas South Ave 2 Ships don’t run on diesel alone. They need a crew, and that crew needs food. And that food needs a galley for preparation. Cospolich makes galley equipment. From company website: You can view the full line of products on the company website. This just lists the major categories. You can find more information on the company website: This post specifically focuses on a material called Aptiform, by NetComposites. Aptiform provides a different type of structural composite material. Aptiform uses self-reinforced plastics. The major advantage is that these composites are recyclable, unlike many traditional composite materials. Product description, from Aptiform website: The Aptiform moulding process has been specifically developed for the efficient manufacture of components from self-reinforced plastics, based on the results of extensive development work undertaken by NetComposites in collaboration with leading industrial companies and universities. The unique forming process allows OEMs to benefit from the light weight, recyclability, high impact performance and low cost offered by self-reinforced plastics – a family of materials with both fibre and matrix made from the same polymer. These materials offer a unique balance of properties and cost, particularly suited to radio transparencies and ballistic components. The family of materials includes self-reinforced polypropylene and PET, with developments currently being made in polyamides and polyethylene. Specific strength and stiffness are approximately equal to glass-reinforced polymers, whilst properties such as impact performance and radio-transparency far exceed conventional materials. We’re currently involved in component manufacture and product development in aerospace, defence, personal protective equipment, leisure craft, luggage and low volume automotive. The material benefits exploited by these sectors are radar/radio transparency, high impact performance/ballistic properties, weight and recyclability. The Aptiform moulding technique is based on the results of extensive development work undertaken in collaboration with customers and materials suppliers, and there are only a handful of companies worldwide that have the ability to form this family of materials. Aptiform is a brand of NetComposites. More information about Aptiform can be found at the website: 4a Broom Business Park +44(0)1246 266240 +44(0)1246 266249 Think lifting, heavy lifting, and rigging in general. Sheaves, hooks, shackles, etc. If it involves a crane or any type of lifting, Crosby probably has something that you need. From company website: The Crosby Group was conceived with a long range goal to develop into a single source for accessories used in the lifting and material handling industry with the highest levels of quality control available. Through a creative program of product development and aggressive acquisitions of market-leading lines, Crosby began its growth. The current experience level of our employees has been many years in the making. The company has a very large catalog of products. Too many to list them all here. Here are just some of their categories: You can view the entire catalog here: http://www.thecrosbygroup.com/html/default.htm#/ Crosby has plenty of details, including their full catalog and drawings of their products, on their website: You can locate a sales manager from the Crosby website: Deansteel makes marine firedoors. All doors are certified for USCG CFR-46 and IMO-FTP codes. Their primary advantage is the focus on marine fire doors specifically. You can find several pieces of useful information on their website. From company website: Since our first joiner job in 1969, Deansteel Manufacturing has come a long way to better serve the marine and offshore industries. This includes a full line of USCG CFR-46 and IMO-FTP Code marine fire resistant doors, frames, and windows; as well as all steel berths and marine furniture. This line of joiner door units and windows is certified by the USCG and Lloyd’s Registry. Deansteel has long been known in the offshore industry for top quality construction, durable products, and dependable delivery, all at competitive pricing. All of our products are manufactured to the very highest standards of quality giving you many years of performance in the harsh offshore environment. Whether you need us today or tomorrow, we’ll be here to serve you. The main products for Deansteel are fireproof steel doors. The company website contains further information on their products. You can find current contact information on the company website: http://www.deansteel.com/marine/contact_us.php CORPORATE OFFICES If you build composite sandwich panels, then you need a foam core. You probably need several different types of foam cores. Enter Diab, who manufacture a wide range of foam cores. They also provide extensive technical knowledge on how to select the right core, how to design a sandwich system, any any other questions you may have about sandwich panels. Here is the full range of foam cores that Diab makes. Full information available on their website. All products come with material data sheets, which are absolutely essential for proper engineering design of sandwich panel systems. Diab also offers their engineering expertise to assist with proper composite design. Quote from Diab website: Our Technical Services team and Composites Consulting Group (CCG) have a unique combination of practical and theoretical experience from various industries, ensuring that solutions are valuable from both a design and a manufacturing perspective. We take a holistic perspective for the best possible combination of core, finishing, kits and process according to customers’ needs.Many of our customers take advantage of our engineering expertise to ensure each element fits together for optimal performance. Our integrated range of solutions and services can serve you in every part of the composite design and manufacturing process, with competence including: Core material selection Finishing selection Kit optimization Structural calculations Scantling Set-up and training of manufacturing processes If you want to learn more about Diab, or just get an education in foam cores in general, you can visit their website: You can find full details for contact information in various countries on Diab’s website: Charles Previte VP Sales Americas DeSoto Texas 75115 USA When out at sea, even glass windows need to stand a harsh environment. Diamond Sea Glaze offers marine windows, doors, hatches, and custom glass. From company website: Diamond Sea Glaze designs and manufactures custom windows, doors and hatches for customers around the world. DSG delivers what our customers demand: sleek, strong and secure closures. DSG closures have quality built in – so everything else stays out. Each order is manufactured separately from beginning to end in our 80,000 sq. ft. vertically integrated plant just outside Vancouver, Canada. We are one of a few closure manufacturers in the world that insists on processing its own glass so we can ensure optimum quality control. Check out some of our innovative marine product solutions. Check it out in New Products. Whatever your marine closure or custom glass needs — Call Us First. You can find full product details on the company website. This just provides the major categories. Diamond sea glaze can do custom glass printing and imaging. You can learn more on the company website: http://www.diamondseaglaze.com/ Diamond Sea Glaze Phone: (604) 607-0091 Discflo make disc pumps. These unique pumps operate on a different principle from a conventional pump. They work on the same concept as a Tesla turbine, utilizing boundary layer effects to pump the fluid instead of normal foil sections used on conventional impellers. The impeller of a Discflo pump is a set of flat discs, sometimes with ridges on the discs. The disks are spaced close together, and use boundary layer effects to pump the fluid. From company website: Discflo’s Disc Pump is based on a non-contact, non-impingement technology. Successive layers of fluid between two discs (the Discpac) travel faster towards the center, relative to the rotating discs, and are stationary on the disc surfaces, acting as a ‘boundary layer’ Pump is boundary layer-viscous drag. Its application to pumps commercially is new, but it has been used widely in fluid engineering for over 100 years. A common example of this principle is the phenomenon of pressure drop or friction losses through a pipe system. Examination of the cross-section of a pipe under laminar (non-turbulent) flow conditions shows that layers of liquid travel at different velocities. The stationary pipe exerts a ‘drag’ force on the flowing liquid. The velocity of the layer adjacent to the pipe is zero, an effect known as ‘boundary layer’. Successive layers flow increasingly fast with the highest velocities at the center point between the pipe walls. DISCPAC IMPELLER This is essentially the same boundary layer-viscous drag principle that is used by the Disc Pump. The pump ‘impeller’ comprises a series of parallel discs called the Discpac. As the discs rotate, they create drag and an initial boundary layer of fluid adheres to their surfaces as flow enters the pump. As the discs rotate, the boundary layer formed on the discs surfaces is stationary, relative to the discs. Similarly the fluid travels iincreasingly fast towards the center of the gap between the discs, relative to the discs. Kinetic energy is transferred through layers of fluid molecules between the discs, generating velocity and pressure gradients across the Discpac. This creates a powerful force that ‘pulls’ the product through the pump in a smooth, pulsation-free flow. Because the system does not use pushing or impingement to move product through the pump, it has some compelling advantages over traditional impeller technologies and progressive cavity devices. This is especially true for handling difficult fluids, such as abrasive, viscous, high solids, large solids or air-entrained fluids, and for shear sensitive fluids and emulsions. Due to the design, the Discflo pumps have a long lifetime and require less maintenance than conventional pumps. They are best suited to situations where you have a high viscosity fluid, or a fluid with emulsions. Discflow offers a large range of pump applications. Includes in-line, close-coupled, side-by-side, over-under, and self-priming configurations for hard-to-pump uses. Ideal for wastewater and viscous, high solids sludge and slurry applications. Combines heavy duty construction with clog-free operation for hard-to-pump industrial applications. Offers unique productivity and cost-saving benefits for users in the chemical processing industry. Ideal solutions for reliable, low maintenance operation in the harshest environments.. Includes the SP Series using Discpac technology and MIS Series centrifugal pumps. Ideal for heavy duty sludges and slurries in high temperature and high pressure applications of the oil and petrochemical industries. New line of pumps offering superior abrasion and corrosion resistance available on all standard Disc Pump models. You can visit the company website to learn more about Discflow and the details of their products. Current contact information is on the company website: http://www.discflo.com/about-discflo-corporation/the-discflo-team Crouse-Hinds offers electrical fittings and equipment. Everything from outlets to lighting. They also specialize in electrical equipment for explosion proof and hazardous environments. From company website: As the electrical industry’s global leader for explosionproof and hazardous environments, we’re constantly pushing forward and looking ahead, advancing electrical and instrumentation products in new and innovative ways. Eaton’s Crouse-Hinds Business manufactures over 100,000 products for NEC and IEC applications, including: conduit fittings and cable glands, industrial control and electrical apparatus, enclosures, industrial luminaires (including LED), plugs and receptacles, drilling and marine products, and solar solutions. You can fine the full list of products on the company website. This just lists the major categories. You can find plenty of details on the company website: http://www.cooperindustries.com You can go to the company website for local contact information: http://www.cooperindustries.com/content/public/en/crouse-hinds/about_us/contact_us.html 1201 Wolf Street Phone: +1 (866) 764-5454 Edinburgh Designs specialise in the design and installation of wave and tidal research facilities. Since 1987, we have worked on many different projects across the world and have installed over 1550 wave paddles. Our customers have different research goals so our products are continuously being adapted and improved to provide solutions that fit each user’s needs. We have developed a wide range of wavemakers that combine robust mechanical systems with a sophisticated digital controller specifically designed for wave tanks. We offer a unique combination of proven technology alongside leading edge innovation. For videos of our machines in action please review our YouTube channel. There are numerous ways to engage our services from end-to-end solutions to ad-hoc consultancy at any stage of the process. We can tailor our involvement to your budget. We can also provide quotations at an early stage so that you can identify how to approach your funding requirements. We’ve over 20 years of experience at the forefront of the industry. This has allowed us to work on a diverse range of projects including: Contact us to learn more about how we can work together to create the best solution for your project. Edinburgh Designs Ltd 27 Ratcliffe Terrace Edinburgh EH9 1SX United Kingdom Energy Focus creates LED lighting for marine applications. Energy Focus creates LED lighting products in all shapes and sizes. Energy Focus also creates LED lighting tubes intended for retrofit into existing flourescent fixtures. You can learn more on the company website: Please consult the website for contact information. Exlar makes electric linear actuators. Linear actuators generate linear motion. Electric linear actuators are ideally suited to situations when you need power and precision at the same time. Quote from Exlar website: Exlar offers many distinct benefits over hydraulic, pneumatic and other electromechanical systems: Lower cost to operate More compact packaging Ideal form factor Load ratings to 40,000 lb and above Speeds to 60 in/sec and above Longer life, up to 15x that of similar sized ball screws Completely sealed units Operation with any servo drive Completely integrated actuator/drive/control products Exlar custom products Exlar provides a wide range of linear actuators for various applications. You can download the entire product catalog from their website. Exlar provides plenty of further details on their website. You can find full details of the contact information on the website: Exlar has a wide network of distributors to provide assistance. Your client needs a galley design that can feed its crew up to 200,000 calories per day. And to keep the crew happy, the client will employ a gourmet chef that has very specific expectations for their workspace. What does that mean for galley design? And come to think of it, how do we fit all this food onboard? Enter Galley Design and Sales. They provide consultancy, design, equipment supply, and fabrication for ship’s galleys and laundry facilities. Their talents include equipment specification, proprietary shelving designs, refrigerator design, and much more. If it concerns galleys, they can help. John A Richards Sales Manager a division of Restaurant Design and Sales, LLC 1813 130TH Ave NE # 220 Within the marine market, GE Transportation makes diesel combustion engines engines. Engines for main propulsion on various sized vessels. Read on to see their product range. Quote from GE Website: GE has been designing and building high-performance diesel engines for more than 40 years. Today, we’re one of the leading manufacturers of medium-speed diesel engines in the world. GE’s family of medium speed marine diesel engines includes 8, 12 and 16 cylinder V configurations, as well as inline 6 and 8 cylinder configurations. With over 15,000 engines operating worldwide, working in some of the most challenging industrial environments, GE Engines are dependable, long lasting, durable and efficient. These high compression EFI engines deliver reduced fuel consumption, improved reliability and decreased emissions. Main engine lines, taken from GE website: Our first marine inline engine, the L250 was designed using proven technology to produce a powerful product with excellent fuel efficiency. In the V250 marine engine, we’ve combined the best features of earlier engine designs with advancements proven to deliver efficiency, reliability and performance advantages. Our V228 engines (formerly 7FDM) produce continuous power from 1045 kw to 3060 kw. With exceptional reliability and operating costs among the lowest in their class, V228 engines from GE are the right choice for dependable, efficient power. GE is the largest supplier of EMD* compatible products and components for the Marine and Stationary industries. * EMD is a trade designator of Electro-Motive Diesel, Inc. GE is not an authorized EMD distributor, nor is otherwise associated or affiliated with EMD. However, GE does represent that its replacement parts, components, subsystems and services are compatible with and usable on EMD locomotives and engines. You can find further data on all the engines on GE’s website: http://www.getransportation.com/ GE provides full details of contact information on their website: GMT Composites: The name says it all. They make composite parts for applications ranging from marine to aerospace to robotics. You name an application, and they probably have a composite component for it. One of the better known GMT products are the composite spars for sailboats. They can even be finished with the appearance of traditional wooden spars. Quote from GMT Website: GMT Composites, Inc. has a long history of innovation. The company was started in 1984 and has been a success ever since. The new company built carbon rudders for race boats and quickly gained an international reputation for providing high quality lightweight structures. Other projects at which GMT excelled were production of America’s Cup tank testing models (in addition to AC rudders and quadrants), wind generator blades and propeller patterns and other parts for United States Navy sub-contractors. GMT was one of the first marine companies to make extensive use of uni-directional carbon fiber pre-preg. Word of the company’s expertise spread. GMT expanded its market into other industries such as medical devices, aviation composites and robotics. You can find the full list of products on GMT’s website. Here are just some of the categories for applications. You can find many more details on the company website: For sales and information on our products please contact David Schwartz at: For administrative questions please contact Cathy at: 48 Ballou Blvd GMT Composites 48 Ballou Blvd Bristol RI 2809 USA If the shipping industry were a country, it would be ranked between Germany and Japan as the sixth-largest contributor to global CO2 emissions. Helping the maritime industry as a whole implement zero emissions drive technology will not only add operational benefits to the myriad of business owners but also have a profound impact on the reduction of global pollution and CO2 emissions. We know that air pollution is cutting short people’s lives and causing health problems, that greenhouse gas emissions are warming the planet and drastically changing our ecosystems, and we know that the emissions from the world’s maritime fleet is a major contributing factor in all of this. We also know how to solve this problem. We have the solution to bring maritime emissions to Zero. Our mission is to partner with you to bring the benefits of zero emission hydrogen fuel cell technology to your business and the planet. Let’s get this done together. Meet the hardware store for the industrial world: Grainger. They offer a huge range of products for plenty of needs. They also offer several services. From Grainger website: Grainger is a leading provider of top-quality industrial supplies worldwide. We carry the brands you trust, along with money-saving alternatives to suit any budget. We add new products nearly every day to make sure we offer the latest, high-quality products. We also provide product services such as lighting upgrades, lighting project management, hazardous recycling services, storage equipment/ installation and safety services, along with specific product resources for many of your operation’s most pressing needs. You can find the full list of products on Grainger’s website: http://www.grainger.com/Grainger/wwg/viewCatalogPDF.shtml?browserCompatable=true&adobeCompatable=true&toolbar=true&Catalog=main# This just lists the product categories that they carry. Grainger also offers the following services: You can find all the details on their website: You can check Graingers website to find you local branch for contact: http://www.grainger.com/Grainger/wwg/branchSearchRender.shtml Gurit provides composite materials and composite systems. This includes: structural foam cores; fibers; adhesives; epoxy; carbon fiber; and much much more. From Gurit website: Gurit Composite Materials can provide complete technical solutions drawing on a broad range of expertise in composite materials design, material development and materials application. This extensive knowledge has enabled the development of a leading range of products for a broad spectrum of applications. Gurit’s Composites Materials business focusses on the Wind Energy, Transportation, Industrial and Marine markets as well as penetrating and developing emerging and new markets and applications for composite materials. The full range of composite materials are available on the website (http://www.gurit.com). This just lists the major categories for their products. You can find material data sheets on Gurit’s website, here: http://www.gurit.com/gurit-product-datasheets.aspx You can find the full details of all that Gurit offers, on their website: Gurit provides a range of distributors and contacts. You can find full details on their website: Gurit (USA) Inc 115 Broadcommon Road Bristol Rhode Island 2809 USA Halton offers a variety of products for indoor air and environmental control. From kitchen ventilation to air filtration to fire dampers. From Halton website: Halton’s range of HVAC products and systems covers air diffusion, air flow management, ventilation fire safety, kitchen ventilation and air filtration both at land and sea. All components are designed to build comfortable, safe and energy efficient indoor climates. Halton’s mission is to enable wellbeing in indoor environments. We are involved from design to building use and create comfortable, safe and energy efficient indoor environments from offices to marine applications. You can view full details of all products on Halton’s website. This just lists some of the product categories. Diffusers and terminal units You can find full details on Halton’s website: You can find contact details for the various Halton offices on their website: http://www.haltonmarine.com/halton/cms.nsf/www/marine-contacts-global HamiltonJet makes waterjets. From HamiltonJet website: The current HamiltonJet waterjet range includes models for power inputs from 150 to 3000kW, for vessels typically up to 60 metres long. All models include features such as integral intake and transition duct for easy installation, as well as steering and reverse components. All but the smallest units include fully integrated hydraulic reverse systems with jet-driven hydraulic pump, control valves & oil-cooler cast into the waterjet intake. Here are the major waterjet categories that HamiltonJet provides. All product descriptions are from the company website. HamiltonJet’s smaller range of waterjets – 8 models ranging from 200mm to 400mm diameter impellers. HJ waterjets are generally suitable for 6-20m craft, depending on the number of waterjets used, hull displacement, and the vessel’s application. Control systems range from fully manual, to manual hydraulic to the electronic blue ARROW control system. HJ series waterjets are sold and supported through HamiltonJet’s extensive network of Distributors. HamiltonJet’s larger range of waterjets – 7 models ranging from 420mm to 810mm diameter impellers. HM waterjets are generally suitable for 18-60m craft using two or more engines and waterjets. Control systems are hydraulic or electronic. Because of the more technical application criterea for HM series waterjets, these models are generally sold and supported from the HamiltonJet factory and Regional Offices, with local assistance from Distributors. The HT Series comprises three advanced design mixed flow waterjets offering improved efficiency and cavitation resistance compared with other similar sized waterjets. The HT Series also features a number of design initiatives to improve reliability and serviceability of the waterjets in operation. Due to the specialist nature of HT Series Waterjet installations it is crutial all aspects of propulsion for these projects are discussed with an authorised HamiltonJet Distributor and the HamiltonJet factory in New Zealand. HamiltonJet also designs and manufactures hydraulic and electronic control components for all its waterjet models. Its electronic control systems can integrate with a range of other vessel systems, such as engine and gearbox controls, Autopilot, Voyage Data Recorders and Dynamic Positioning Systems to provide complete vessel maneuvering control. You can find full details of HamiltonJet models on the company website: http://www.hamjet.co.nz/hamiltonjet You can find the local distributor for HamiltonJet on the company website: http://www.hamjet.co.nz/contact_us Harding manufactures lifeboats, rescue boats, davits, hooks, and provides related services. Credit: Harding From company website: Harding is the global market leader of marine life-saving systems, with a solid track record of deliveries to offshore installations and vessels world wide. The company developed the first lifeboat (FF1200) fulfilling the new regulation, DNV 406, for the North Sea and it is also the developer of the enclosed davit system. Harding was formed in 2013 when Schat Harding and Noreq AS was merged together in order to form the world’s leading manufacturer and supplier of lifesaving equipment. Our history, however, goes all the way back to the 1920’s. Hard has a wide array of products, including the following: You can find more product information on the company website. You can find current contact information on the company website: http://www.harding.no/contact/europe/norway-seimsfoss Harding Safety AS Seimsvegen 116 5472 Seimsfoss Norway Phone: +47 53 48 36 00 Fax: +47 53 48 36 01 E-mail: Hawboldt industries provides winch systems, reels, windlasses, capstans, and more. If it involves a line or cable, Hawboldt can probably help. From company website: Hawboldt Industries combines more than a century of service to marine industries with today’s best in integrated design and manufacturing capabilities to deliver innovative engineered solutions for line-handling and lifting applications. From trawling nets to oceanographic survey equipment, Hawboldt is a preferred source for the specialized winch systems, reels, windlasses, capstans that drive the efficiency and productivity of critical ocean-based technologies today. Hawboldt is also a leading manufacturer of propellers, also providing complete repairs and onsite service. The seas connect all markets worldwide, and this is reflected the range of customers we serve. Hawboldt products are at work everywhere from the Antarctic to the Grand Banks to the inland waterways of America. Our traditional products for fisheries and shipbuilding are now joined by advanced projects in national defense, offshore oil & gas and undersea research. Hawboldt makes a variety of marine equipment, including: Look at the company website for more details. You can find more details on the company website: http://www.timberland-group.com/hawboldt/index.html The company website includes current contact information. http://www.timberland-group.com/hawboldt/contact/index.html 220 Highway 14, P.O. Box 80 Hilti manufactures tools for industrial construction and a variety of products for ship outfitting. As the marine designer, you may care about this because several of the Hilti tools are part of outfitting systems that have the potential to reduce shipyard labor. The anchor systems and installations systems are especially useful for marine applications. The X-BT fastening system provides a method to attach threaded studs to steel plate, after the plate is painted, and without welding. The system used a tight dimensional fit with forced entry to generate a secure and strong connection. You can find more details on the company website. Search for X-BT fastening system. Applications: Hilti also provides channel systems for outfitting. This is an erector set on steroids. The channels are capable of some very strong loads. The entire system is modular and easily assembles. You can find more details on the website. Search for MI system. Applications: Full details of all products are available on Hilti’s website: Want to learn more? You can find full contact details on Hilti’s website, or call their main number below: Customer Service: +1 800 879 8000 Contact details: Go to website (https://www.us.hilti.com/) and click “contact us” in top right corner. To investigate wave processes, or test the design of ports and harbours, coastal protection schemes and off-shore structures, engineers and scientists must be able to realistically simulate a wide range of wave conditions in a physical model. We’ve been modelling coastal and marine structures for more than 70 years, and we use this expertise to design state of the art physical wave generation systems for use in hydraulic, coastal and marine research facilities. We also supply the full suite of instrumentation and software needed to reliably collect and analyse results. Because our designs have been rigorously proven in use our own research and consultancy projects, you can be confident that they satisfy the most stringent user requirements. All our wavemakers can generate random waves and come equipped with active wave absorption for precise control of wave conditions within your flume, wave basin or towing tank. Our wavemakers can be designed for shallow water or deep water applications from the narrowest of flumes to the widest of 3D basins. Where very wide facilities are involved our multi-element wavemakers are made up of individual modules that can be linked together to create long and short crested waves together with the capability of oblique waves at specific locations in the facility using side wall reflection techniques. The wavemakers are electrically powered using the latest in servo-motor technology and easy to maintain with all precision components above water, their stainless steel construction delivers a design life in excess of 20 years. As a hugely experienced user and supplier of wavemakers, instrumentation and software we know that nothing is ever standard. We’re constantly developing new products, upgrading and customising existing ones, and looking to develop new techniques and technologies to meet the constant demands of our own engineers and scientists and we recognise our customers face the same challenges. If you can’t find what you need please contact us to discuss your challenges and requirements. From modifications and adaptations of existing products to complete custom solutions, we can help. UK Head Office Howbery Park Wallingford Oxfordshire OX10 8BA United Kingdom Hundested Propeller offer superyacht, fishing and commercial marine customers a complete effective propulsion system solution. The Hundested Controllable Pitch Propeller in combination with the custom-made marine gears, thrusters and sail drives offer a hybrid solution with visible operational cost savings. Our range includes the following products. Hundested Controllable Pitch Propellers are available with variable or multi pitch options for installation on a custom Hundested Propeller Shaft. We have two main categories in our gear program: The gears’ range in reduction ratio depending on whether they are single reduction or double reduction. Single reduction range in reduction ratio from 2,030 to 6,580. Double reduction range in reduction ratio from 6,050 to 12,600. Made-to-order products. We manufacture propeller shafts in one piece in lengths up to 12m. All our marine gearboxes are made-to-order. This means that every gear is designed especially for the individual project. We made our first pitch control units in 1929 for the Hundested engine in connection with our propeller system. This was of the mechanical type with a big hand wheel to change the pitch. A lot has changed since then. We have used this extensive experience to update our units through the years. Our pitch control units are shaft line units designed to be installed aft of a standard reduction gearbox without built-in pitch control or with direct electric drives. The shaft line pitch control units all have built-in thrust bearings, long stroke for feathering propellers and can be delivered with semi-flexible foundations for very low noise applications. We can supply two different types of pitch control units. The difference is in the way the pitch is activated: It can either be electrically (FR-ELH) or hydraulically (FR-HP) activated. We can also supply a system (FR-HFC) with an O.D. box built on to an existing reduction gearbox without built-in pitch control. We supply our pitch control units to superyachts, mega yachts, and commercial vessels used for fishing and ferries. Our units can be installed on all types of vessels. The RPS (Retractable Propulsion System) and SPS (Saildrive Propulsion System) provide minimal resistance when under sail and during races. The systems have the following features: – The systems are light weight – CP Propeller – Require minimum space inside the hull and engine room – Can be posisitoned near the center of the vessel, for optimum weight distribution – Highly efficient when motoring. – Replace a normal stern propeller The RPS system can swing up into the wet box in the hull. When the doors are closed there is no resistance when sailing. When down the doors close around the leg so the hull looks smooth. It is only the leg that protrudes from the hull. The wet box takes up app. 2m x 1m x 1m inside the hull. The SPS system stays down but the propeller can go into feathering posisiton. This will give a little resistance when sailing but the resistance is far less than from a normal shaft, P bracket and propeller in sailing position. The SPS system takes up a lot less space in the engine room since there is no need for a wet box. Both the RPS and SPS can be driven by an electrical motor or a combustion engine. The RPS will always have the power in at a horisontal direction. The power unit can be aft of the RPS or on the side depending on how it is most convenient. If a combustion engine is used a clutch unit must be mounted on the engine. In the clutch unit it is possible to have 2 PTO/PTI. The PTI can used for regeneration. The SPS can have an electrical motor mounted directly on top of the leg. This will take up as little space as possible in the engine room. Both of the systems exsist in three different sizes. The sizes are called 286, 335 and 386. The numbers correspond to the diameter of the propeller hub and that correspond to the power. – 286 goes up to approx. 400kW – 335 goes up to approx. 540kW – 386 goes up to approx. 660kW The lower leg are similar on the RPS and the SPS. The RPS can adjust the propeller pitch forward to astern. The SPS can adjust the propeller pitch fethering to astern. When designing the system for the boat it is important to decide where the focus lies. Is the focus on motoring or on regenerating. The propeller on a RPS/SPS can be positioned forward or astern. That is just a question of turning the leg 180 degress. If the focus is on having the best possible efficiency when motoring the propeller should be pointing forward when in motoring. If the focus is on regenerating the propeller should be pointing astern when motoring. The difference in efficiency is causted by the shadow from the propulsion leg. When regenerating the propeller should always turn opposite of the motoring direction. Regeneration is posssible on both of the systems. If a RPS is used for regeneration a hybrid clutch must be mounted on the input shaft of the clutch unit. A generator must be mounted on the PTO/PTI. The power will then come from the propeller into the clutch unit and out through the PTO/PTI. The size of the generator is limited due to the size of the PTO/PTI. If a SPS is used for regenation the electrical motor/generator on the SPS is mounted directly on top of the leg it is then the size of the generator or the electronis parts connected to the generator that is the limit. On a conventionel propulsion system about 20% of the designed power take out can be regenerated. On a RPS/SPS about 27% can be regenerated due to the fact that the leg can be turned 180 degress. Turning the propeller blades the opposite way makes them about 30% more efficient than a standard positioned propeller when regenerating. When motoring the systems work the same way. The leg can be used with the propeller pointing forward or astern. The leg is not intended to be used as a steering system. The leg should be in a fixed position when motoring. When maneuvering the engine is in a fixed medium-range RPM and the lever only adjusts astern – ahead by changing the pitch of the propeller. The leg can now be turned sideways to work as a thruster. The thruster will be with the max. power from the engine/motor. The leg turns from ahead to sideways in less than 3 seconds. The leg can give propulsion in any direction when maneuvering. The boat will often be maneuvered without the use of a bow thruster. The boat will be able to go sideways, sideways and astern, sideways and ahead or whater ever is needed. Per IMO regulations, most ships require ballast water treatment technology to prevent the spread of invasive marine organisms. Hyde Marine manufactures ballast water treatment systems, based on a combination of filtration and UV disinfection. From corporate website: The Hyde Marine BWTS is optimized for integration into a vessel’s existing design and easily adapts to operating conditions. The system includes appropriate pretreatment to remove solids and large organisms. The Hyde GUARDIAN Gold’s UV reactor kills or inactivates biological organisms including zooplankton, algae, bacteria, and pathogens from ballast water without affecting the normal operation of the ship and without using chemicals, toxins, or generated substances. Ballast water is treated again with UV light during discharge to ensure the maximum effect and ensure compliance. Key Benefits of the Hyde GUARDIAN Gold BWTS: The robust design and exceptional reliability of the Hyde GUARDIAN system has been proven during many years of service aboard ships serving all areas of the world. For more information on specific systems tailored to meet the demands of your vessel, please select the type of Hyde Guardian Gold system based on: Hydraquip equals hydraulic and pneumatic machinery and components. Hoses, couplings, valves, everything you could want. From Hydraquip website: For over 60 years Hydraquip has been providing the finest in hydraulic and pneumatic solutions. As representatives for over 80 top line manufacturers of fluid power components we offer our customers the resources of engineering techniques, application expertise and problem solving capabilities of literally hundreds of highly qualified people. You can view the full list of products on their website. This just lists major product categories. You can learn more about service and repair from Hydraquip’s website: http://www.hydraquip.com/service-repair.html For your repair and service needs, Hydraquip will first clean and inspect your equipment thoroughly to determine the most economically feasible plan of action. At our Houston, Grand Prairie, and Lafayette locations, we maintain complete factory authorized repair and testing facilities staffed by factory trained technicians. Adding to the overall efficiency of your repair service experience, we offer most parts and products in stock which maximizes turnaround time and saves you money. Our technicians will also go on site to repair or troubleshoot your equipment which reduces costly down time. You can view full details of all products and download the line sheet from hydraquip’s website: Hydraquip lists full contact details on their website: In-Mar systems are distributors for several major products. Product brands include From company website: Wynn Type C & D Mk5 – Heavy Duty Straight Line Wipers The heavy duty Type D (externally mounted motor) and Type C (internally mounted motor) straight line wipers offers the most advanced design of linear action window wiping systems for marine and other specialist applications. A large wiped window coverage can be achieved, providing maximum view from the ships bridge whatever the weather, in temperatures from as low as -30ºC to extreme tropical conditions. Wynn Type 1850 External Pantograph Wiper The Type 1850 external pantograph wiper is ideal for heavy duty usage in medium sized applications. • Totally enclosed drive unit for safety, reliability and longevity Wynn Type C350 Clear View Screen The C350 is the latest Clear View Screen design. Switch on and you can see clearly, whatever the weather – rain, snow or ice – for perfect continuous visibility. Fully complies with ISO 3904. You can view full details on the company website: They also have a contact form on the company website: Intelligent Engineering offers steel sandwich panels. You get all the advantages of sandwich panel systems, and the reliability of steel faces. From company website: SPS is a composite material comprising of two metal plates bonded with a polyurethane elastomer core, which transfers shear between each plate and eliminating the need for stiffeners and precluding local faceplate buckling. The thicknesses of the composite elements are tailored to meet the needs of each application. SPS is an excellent alternative to both stiffened steel and reinforced concrete and delivers high stiffness to weight ratio, simpler fabrication, improved performance and increased safety. SPS structures such as ships, bridges, sport stadiums, floor systems and blast walls can be designed and produced using industry standard techniques. SPS is used in a wide variety of applications including stadium and arena terraces, bridges and ships as well as structural flooring. You can find full details about the SPS system on the company website. The following was taken from the website and provides a brief description of the technology. SPS combines the performance advantages of metal faceplates, a PU core and a composite structure in one material. More than 10,000 tests, by IE, Elastogran (part of the BASF Group) and independent research institutions, have been conducted on SPS plates, structures and component materials to confirm primary behaviour and to establish performance across the necessary range of engineering characteristics including: flexural and compressive strength, fatigue resistance, bond strength, corrosion resistance, impact resistance, acoustic performance, thermal insulation and dampening You can find further details on the company website: You can find contact details on the company website: SPS North America (Holdings) Ltd 14 Chamberlain Avenue (Suite 300) Ottawa Ontario K1S 1V9 Canada Intercon makes the coupler used in articulated tug barge (ATB) connections. The full company name is Intercontinental Engineering-Manufacturing Corporation. The ATB connector allows pitch freedom of motion and can couple at a range of drafts. They also offer heavy machinery and fabrication services. From company website: In simplest form, the patented Intercon Coupler System provides a single degree of freedom allowing the tug to pitch about a transverse connection between the tug and barge. All other motions are restrained so that tug motions match barge motions in roll and heave. The connection is mechanical – accomplished with two independently mounted ram assemblies, gear driven, and configured for tug installation. The rams stroke transversely, engaging the vertical ladder structures incorporated into both walls of the stern notch. The resulting tug-barge connection is rigid and mechanically locked. You can view full details on the Intercon ATB system and other components on the company website: You can get detailed contact information on the company website: http://www.intercon.com/contactform.aspx No marine structure is complete without paint. Lots and lots of paint. International Paint offers it all. Top side paint, anti-foul paint, textured paint for decks, high durability paint, primers. Everything. And they offer global distribution. Don’t know which paint you need, they will be happy to offer advice to ensure proper selection. From company website: Our product is paint. We provide high performance coating solutions to enhance, beautify and protect a diverse range of structures. From the largest oil tanker to the Sydney Harbour Bridge, we have the right product to satisfy your operational, financial and environmental needs. With over 800 qualified technical staff around the world – many are qualified to NACE Coating inspector Level II, FROSIO Inspector Level II or equivalent. Backed up by 16 manufacturing plants, operations in 60 countries, 8 specialist marine laboratories and over 500 delivery points worldwide. The most reliable marine coatings supplier in the world? It’s a safe assumption. You can find full details of all products on the company website (http://www.international-marine.com/products/worldwide-products-by-category.aspx). This just lists the major product categories. You can find full details and more information than you dreamed on the company website: http://www.international-marine.com International paint has several different locations for contact, depending on your location. You can find specific contact information on their website: http://www.international-marine.com/contactus/contact-us-home.asp Jastram Engineering, Ltd handles steering systems for vessels of all sizes. From company website: Jastram systems and system components are designed for a wide range of boats, all the way from small work boats through to large ice breakers and oil tankers. All components are designed and manufactured specifically for hydraulic marine steering systems. The Model B (brass) and Model S (steel) cylinders are ABS type approved while complete systems have been approved by all of the world’s major classification societies. From Jastram product brochure: Jastram B Model Actuators are double-acting equal displacement cylinders, which are directly connected to a tiller. When the B Model is actuated it moves the tiller, which in turn moves the rudder. The actuator sizing is primarily dependent on the maximum rudder torque required. Once the required rudder torque is known the appropriate Calculating the rudder torque is complex. An incorrect calculation can result in failure of the steering system. Torque calculations should be confirmed by a naval architect or designer. For more information on actuator sizing please contact your local Jastram distributor. Type Approved Product. From company brochure: The Jastram Model S Actuators are specifically certified for use in commercial marine hydraulic steering systems. Their rugged steel construction includes many standard features resulting from our long experience in the manufacture, operation and service of steering systems. From company brochure: This high quality, precision axial piston pump features proven designs and marine grade materials. The H pumps are designed to operate in ‘non-pressurized’ hydraulic systems requiring only two lines from the helm pump to the cylinder. From company brochure: Jastram manufactures custom and pre-engineered Hydraulic Power Units (HPU) to meet a wide range of requirements. HPUs produce and direct the fluid movement in the steering system. You can view more details on the company’s website: Telephone: 1-604-988-1111 Jefa Marine produces a wide range of standard rudder blades for boats from 22 to 75 feet length. This unique product line offers the boat builder a modern rudder blade without investing in expensive molds. The rudders are made in our modern GRP factory and are available in many sizes depending on the boat size. What makes the Jefa rudder blades unique and distinct from all other rudder blade producers and yard made rudder blades is the production in solid aluminium molds. This unique production method allows very high pressures to be used in the gluing and foaming process and results in an extremely precise end shape. Traditional glass fiber molds don’t allow any pressure from inside the blade, so one can’t be sure of a good bonding of both sides and the final shape of the rudder. Jefa Steering A/S Agenavej Denmark Welcome to Jotun! Your partner for all your projects, from concept to completion and beyond. At Jotun, we protect property by providing solutions that not only enhance the appearance of your asset but also ensures long-lasting durability. Our range of paints and coatings are inspired by technology, designed to meet the latest industry standards and developed with sustainability in mind. Our specialties include premium decorative paints for long-lasting and beautiful finishes, and coatings for corrosion and fouling protection of metal substrates and passive fire protection of steel. Anticorrosive Coatings Antifouling Cargo Hold Coatings Tank Coatings Topcoats Appliances, Furniture and Kitchen & Bathroom Cabinets Architectural General Industries, Shelving, Energy and Transportation Pipeline Coatings 842 West Sam Houston Parkway North City Centre Three Houston TX 77024 USA Konsberg makes numerous systems for vessel control. All those consoles that the crew integrate with. Bridge systems, ballast control systems, and numerous automation systems. From company website: We deliver systems for dynamic positioning and navigation, marine automation, safety management, cargo handling, subsea survey and construction, maritime simulation and training, and satellite positioning. Our solutions enhance efficiency and safety throughout the whole maritime technology spectrum and we offer additional competence in providing turnkey engineering services within the shipbuilding and floating production sectors. Key markets are countries with large offshore, shipyard and energy exploration & production industries. In exploration we provide sophisticated underwater and positioning technology and systems for survey vessel operation. In field development, we support construction and offshore vessels with innovative solutions for operation and specialist applications whilst in production our hardware and software enhances output and minimises downtime. For maritime transport and offshore vessels, we supply The Full Picture, including navigation, automation, training and safety systems. You can view the full list of products and services on the company website. This is just a brief summary. You can view the full details of products on the company website: You can find specific contact details on the company website. Ladish Valves manufacturers, surprisingly, valves! From company website: Ladish Valves have been produced in the U.S.A. for over half a century. Ladish Valves is recognized as the premier manufacturer of stainless steel and high nickel alloy gate, globe, and check valves. Ladish Valves corporate headquarters in Houston, Texas is ideally positioned to serve its customer base. All engineering, manufacturing and sales of Ladish Valves parts and services function through this location. Ladish Valves are used extensively worldwide in many industries, such as Refining, Petrochemical, Chemical, Pulp & Paper, and Power. You can view the entire product catalog on the company website: http://ladishvalves.com/Portals/203993/docs/ladish%20catalog.pdf The major valve types listed in the catalog are: You can view more details on the company website: For all general inquiries please call 1-866-523-4740 or email sales@ladishvalves.com To contact specific personnel, see below: Bill Distefano – General Manager – bdistefano@ladishvalves.com Machinery Mounting Solutions designs, manufactures and sells mounting chocks under the brand name RotaChock. This vendor manufactures reusable chock solutions for rotating machinery mounting. The emphasis of the RotaChock during a recent presentation was a mounting system that is easy to install, adjustable and reusable. Mounting jobs that take days with epoxy resins, milled chocks or shims can be finished in less than an hour with RotaChock. There are a number of crucial benefits in using a RotaChock, compared to other procedures or products: There are similar mechanical chock products in the market. The people at RotaChock gave the following points: http://www.rotachock.com/start-splash/ Regional Manager Business Development and Research Phone (USA): 985 293 7723 Fax (USA): 985 635 4585 Need a winch or anchor windlass? How about a capstan? Whatever you need, if it is related to winches, Markey probably makes it. Markey is all about commercial winches, in all forms. From company website: Founded in 1907, Markey Machinery Company is the leader in the design and manufacturing of high quality custom deck machinery for workboat, scientific, and dockside applications. We have established our reputation for quality by delivering machinery that is built for the long haul every time. “Hell-for-Stout”” is a term often heard when describing our equipment. Originally coined by our founder Charles Markey in the early 1900s, it remains our guiding principle to this day. You can view full details of all products on the company website. This list is just a summary: In addition to their standard products, Markey offers the following services: You can learn more on the company website: http://www.markeymachinery.com/ You can view full contact details on the company website: http://www.markeymachinery.com/contact/ Mailing Address 7266 8th Avenue South Phone: +1 206-622-4697 Toll Free: +1 800 637 3430 Fax: +1 206 623 9839 Need clean water? Maxim makes evaporators and reverse osmosis watermakers for water purification and desalination. Evaporators work great if you have a large plant with plenty of waste heat. Maxim also offers waste water concentrators and thermal distillation clean solutions. From company website: Maxim continues to offer the most energy efficient & environmentally friendly desalination technology on the market today. Our heat recovery evaporators utilize waste heat to make the highest quality fresh water from seawater, brackish water or contaminated fresh water. We provide water production capacities ranging from 192 GPD to 15,000 GPD. Custom engineered units are also available up to 500,000 GPD. Maxim offers a line of seawater reverse osmosis desalination systems, The Sterling Series, with fresh water capacities ranging from 1,000 GPD to 6,000 GPD. Custom sizes are also available. The Sterling Series has an energy efficient design, 2205 duplex stainless steel ultra-quiet Danfoss pump, and high rejection 4″ seawater membranes. Vertical & horizontal configurations are available. You can find full details of all products on the company website. This just lists the major categories. Production volumes range from 192 to 500,000 gallons per day. From company website: Maxim offers a line of Commercial Marine Reverse Osmosis systems, available in fresh water production capacities ranging from 1,000 gallons per day to 6,000 gallons per day. Custom units are available upon request. Maxim Watermakers offers chemicals for the cleaning and maintenance of your heat recovery evaporator. The scale preventative used for ongoing maintenance has been certified by the National Sanitation Foundation. You can find full details of all products on the company website: http://www.maximevaporators.com Full contact details are on the company website: http://www.maximevaporators.com/Contacts/ContactUs.asp Sales, Parts & Service Order Inquiries Marketing & Distributor Inquiries McMaster-Carr is the equivalent of the hardware store for the industrial world. They offer products in a huge range of categories. Their website claims to have over 510,000 products. Way too many to list here. You can find full details of all products on the company website. This just lists the major categories. You can search the website to find full details on each product you need. They also offer online ordering. You can find full contact information for each distribution location on the company website http://www.mcmaster.com/#contact For general inquiries: Phone: 562 692 5911 McNichols makes grating for walking surfaces. Grating in every weight, texture and pattern you could want. From company website: Discover what literally hundreds of thousands of customers have come to know and trust since 1952 – McNICHOLS is the worldwide leader in providing Perforated Metal, Expanded Metal, Wire Mesh and other Designer Metals, as well as a full line of Grating and Flooring Products. Our loyal customers continue to rely on our experience, vast product inventory and shipping options to produce the right hole solution for their projects. As an ISO 9001:2008 certified company, we will provide you with an unsurpassed level of Service, Quality, and Performance! They have a huge range of products, with full details available on the company website. This just lists a few product categories and trade names. You can find full details of all products on the company website: You can also download the full product catalog from the website: http://www.mcnichols.com/catalogs You can find full details of contact information for each service center on the company website: http://www.mcnichols.com/support Phone: 1-877-884-4653 Phone Hours: Monday – Friday 7:30 AM to 8:30 PM EST When you think of Michigan Wheel Marine, think of propellers. They offer propellers and many other products related to propellers. Michigan Wheels products include propellers for recreational and commercial use. They have propellers for inboard drives and outboard drives. They include the following brand names. Michigan Wheel standard series propellers for pleasure and commercial boats have been the industry standard for 108 years, evolving with the markets to remain relevant. Tried and true 3 blade Dyna-Jet and 4 blade Dyna-Quad pleasure boat propellers are legend and have been enhanced with the addition of the CNC machine finished DJXand DQX for higher speed boats. 5 blade propellers have gained popularity, and Michigan Wheel Marine’s M-500 meets that demand. The Michigan “M” Series is globally sourced to give the Michigan line a highly competitive offering for the global market. – From website of Michigan Wheel. The Federal propeller line concentrates on the application specific custom design and manufacturing efforts. Federal features propellers ranging 12” to 96” in diameters. Michigan Wheel Marine (MWM) is a propeller supplier to custom yacht manufacturers, production boat builders, and commercial shipyards around the world. For those that seek to optimize performance and efficiency, MWM is challenged with expanding propeller design and analysis capabilities. Optimized propeller fit does result in increased speeds, improved cruising range and exceptional passenger comfort levels. . . . The FEDERAL propeller line is often the solution to maximize performance. Michigan Wheel Marine engineers work directly with builder engineers and consulting companies, applying ever evolving, sophisticated propeller design codes to applications. – From website of Michigan Wheel. The commercial offering has been expanded to series such as DQ Special, offering durability, smooth and quiet operation for craft operating at speed. The traditional Machine Pitch, Workhorse, and Kaplan designs are widely used throughout the market. Manufacturing flexibility enables Michigan Wheel Marine to offer variants most suited to particular applications. Expanded areas, 5 blades, particular rake requirements can be accommodated. The PacMaster Stainless steel series has become a standard on fishing boats in particular areas, and Michigan Wheel Marine can offer Stainless steel options throughout is line-up. – From website of Michigan Wheel. Michigan’s acquisition of Hall & Stavert of PEI, Canada, in 1996 brought on additional resource to supply the growing pleasure boat market of the late 1990’s and into 2009. The HyTorq line established a reputation of high quality, and has a strong following for replacement on applications where they were original equipment. With the market contraction, Michigan Wheel Marine consolidated operations in Grand Rapids. All current Hy-Torq propeller patterns and the majority of equipment was brought in to Grand Rapids. Michigan Wheel Marine continues and will continue for the foreseeable future to offer the Hy-Torq line, with every effort made to perpetuate the fine craftsmanship established by Hall & Stavert. – From website of Michigan Wheel. Michigan Wheel also includes Hale MRI, which is instrumentation for propeller inspection. Experienced propeller shops prefer the Hale MRI. With the Hale MRI reporting, the propeller shop can get absolute recognition of propeller condition. The Hale MRI features linear transducers that transmit extremely precise 3-D data to the computer, including measurements of: pitch; rake; track; spacing; geometry; and camber of ANY propeller. Michigan Wheel Marine distributes the Hale MRI. Michigan Wheel Marine and Hale Propeller supply technical support. Units are supplied complete with stand, table, arbors, measurement arm, computer and computer monitor. On site set-up and training is typically available. Michigan Wheel also makes sterngear. Propeller struts, rudders, and side thrusters (fixed pitch and controllable pitch). Aqualube are the brand name for stern tubes, based on a nitrile rubber bearing. From company website: The Aqualube bearing line, well established by the Michigan Wheel Marine Europe and Michigan Wheel Marine MEAA (Middle East, Africa, Asia) divisions will now be available in the Americas. These world class nitrile rubber bearings feature a unique flute design that facilitates the formation of a hydrodynamic wedge in operation,… You find plenty of information, including a propeller sizing application, on the company website: The website includes current contact information. http://www.miwheel.com/contact/ 1501 Buchanan Ave SW Unit C1 (B) G34, 4EB Muir makes deck winches. These include mooring line winches and anchor handling. Their primary market is pleasure craft and yachts, but they also offer commercial products. From company website: Muir have designed and produced anchoring and mooring equipment having set Industry Standards and benchmarks over many years. Continued investment in research and development, design and innovation, keeps Muir at the forefront of the yachting industry. The development of high power to weight ratio equipment with the combination of highly efficient planetary drive gears, medium to high pressure hydraulics, one two or variable speed AC electric drives will achieve the ideal anchoring system to suit your vessel. Muir surpass or meet the world’s most stringent classification standards including ABS, LRS, DNV, BV, NKK, GL, CCS, RINA, RRR, RMSR and comply with MCA and USL codes. Muir offers vertical and horizontal winches, plus capstans and drum winches. You can view more details here: http://www.muir.com.au/pleasure.html Muir offers vertical and horizontal windlasses, plus mega capstans and anchoring systems. You can view more details here: http://www.muir.com.au/mega.html Muir offers anchor winches and mooring capstans for commercial vessels. You can view more details here: http://www.muir.com.au/commercial.html You can find more details on the company website: See the company website to locate a local distributor: MUIR Windlasses Australia 100 Browns Road, Kingston, Tasmania 7050, Australia N.E.I. makes a ballast water treatment system, based on Venturi Oxygen Stripping (VOS). From company website: N.E.I. Treatment Systems is a pioneer and market leader in provisioning large commercial ships with Ballast Water Treatment Systems (BWTS). N.E.I. enables its customers to cost-effectively comply with pending IMO and U.S. regulations that protect the world’s oceans and waterways from invasive aquatic plants and animals. These harmful aquatic organisms are transferred from one ecosystem to another via the ballast water discharged by ships, which if left untreated, are known to cause devastating ecological and economic harm to their new environments. VOS™ Ballast Water Treatment Delivers The VOS™ System induces a low oxygen environment within the ballast tanks which safely and cost-effectively eliminates harmful aquatic organisms without the use of active sub- stances. At the same time, this low oxygen, non-toxic environment also protects the ship’s ballast tank coatings against degradation and corrosion of steel, thereby extending the useful life of ballast tanks to more than 35 years and delivering a BWTS return on investment. The main product is the VOS™ ballast water treatment system, and its system components. The following quote from the company website describes the system in more detail. N.E.I. designs, manufactures, sells, commissions and services the patented and Type Approved Venturi Oxygen Stripping™ (VOS™) Ballast Water Treatment System (BWTS). The VOS™ BTWS fully complies with the IMO’s Ballast Water Discharge Standards, while maintaining a low oxygen environment within the ballast tanks that inhibits steel corrosion and prolongs the life of ballast tank coatings. Please visit the Technology Section for a detailed description of how the VOS™ System operates. The VOS™ BWTS comes in six (6) configurations to match the ballast water flow rates of small ships to the largest commercial vessels built, and can be custom designed or configured in parallel systems to accommodate unlimited ranges of ballast water flow rates. VOS™ System standard models include VOS-500, VOS-1000, VOS-2000, VOS-3000, VOS-4000 and VOS-6000. You can find more details about the system on the company website: You can use the contact form on the company website, or the contact information listed below. Contact Form: http://www.neimarine.com/en/contact N.E.I. Treatment Systems T +1 562-983-9700 National hardware manufactures hardware. All those little bits and bobs you need to make things move, organize, and assemble. From company website: National Hardware is the leader in builders hardware today with more than 15 product categories and over 7,500 SKUs. As a global business, we continue to focus on providing the best hardware and service to our valued customers. You can view the full list of products on the company website. This just lists the major product categories. You can view full details about all hardware on the company website: You can view the company website to locate a specific distributor: http://www.natman.com/where-to-buy Or for direct contact with the company, see their contact information here: Newthex is a leader in the design, assembly and installation of high-quality doors, hatches and elevators for all superyacht and naval applications. Our products can be found on many of the world’s finest superyachts as well as on board naval, commercial and offshore vessels. We work with designers, owners and yards to ensure that each vessel has the access solutions that meet its exact needs. The depth of our in-house design and engineering expertise allows us to offer both a wide range of standard products and fully-customised systems where required. Our products can be fabricated in steel, aluminium and composite materials. Newthex products are precision engineered, manufactured and assembled to the highest standards. They are water or weather proof in all conditions and fire, gas and pirate-proof where specified. They are also durable, reliable and low maintenance. We have many years of experience in supplying certificated products and ensure that all the necessary requirements to satisfy the quality standards are achieved and documented. Newthex offers in depth knowledge to owners, designers and shipyards in order to develop aesthetic, efficient and effective solutions for doors, hatches and elevators. A. Einsteinlaan 20 Kolham TR 9615 The Netherlands Olympic Drives manufactures tough workboat azimuth drives, also known as Z-Drives or rudder propellers. These heavy duty drives deliver full propeller thrust throughout an endless 360 degree rotation, offering a vessel positive and powerful control in all directions. The Olympic Drive is ideal for vessels requiring high maneuverability and/or maximum propeller thrust in any direction. The original Olympic 360 Degree Drive began production in 1969, establishing a market in the northwest forest industry. Since then over 1,250 units have been manufactured, earning the Olympic Drive a reputation for quality and durability. Specializing in small steerable propulsion units, Olympic Drives produces the 100 HP (75 kW) Hydro Drive UD2, the 140 HP (105 kW) Olympic SD1 and the 200 HP (150 kW) Olympic HD3 Drive. The Olympic azimuth drives are installed on a wide range of vessels including CCG buoy tenders, small car ferries, oil skimmers, water taxis, yachts, tugboats, pushboats, log broncs, winders, dredges, workboats, hybrid vessels and many other applications. Olympic Drives manufactures tough workboat azimuth drives, also known as Z-Drives or rudder propellers. These heavy duty drives deliver full propeller thrust throughout an endless 360 degree rotation, offering a vessel positive and powerful control in all directions. The Olympic Drive is ideal for vessels requiring high maneuverability and/or maximum propeller thrust in any direction. The original Olympic 360 Degree Drive began production in 1969, establishing a market in the northwest forest industry. Since then over 1,250 units have been manufactured, earning the Olympic Drive a reputation for quality and durability. Specializing in small steerable propulsion units, Olympic Drives produces the 100 HP (75 kW) Hydro Drive UD2, the 140 HP (105 kW) Olympic SD1 and the 200 HP (150 kW) Olympic HD3 Drive. The Olympic azimuth drives are installed on a wide range of vessels including CCG buoy tenders, small car ferries, oil skimmers, water taxis, yachts, tugboats, pushboats, log broncs, winders, dredges, workboats, hybrid vessels and many other applications. Palfinger Ned-Deck make davits cranes, and even some winches. All types of davits and cranes, for any purpose. From company website: PALFINGER NED-DECK manufactures Launch and Recovery Systems (LARS) such as davits and cranes for life saving purposes, daughter crafts, work boats, fast interceptors and fenders. PALFINGER NED-DECK offers innovative, compact, high quality and safe launch and recovery systems, whereby an ideal balance is achieved between safety factors and economical factors without jeopardizing aspects such as quality and user-friendliness. The Launch and Recovery Systems are designed for long-time operation under especially tough conditions in a highly corrosive marine environment. Easy installation and operation combined with considerable economical aspects make PALFINGER NED-DECK launch and recovery systems a safe and reliable choice. We are proud of the many years of experience of our employees and partners in the worldwide Marine & Offshore Industry, Navy, Coast Guard and Wind market. Over 90% of our products are exported through a well organized world-wide network of sales partners and agencies, supported by our 24 hour call out service/after sales department with authorized service partners around the world. Together with its high level of service, PALFINGER NED-DECK has developed into being one of the leaders in the industry. The list of products are divided into three main service areas. You can find full details on the company website. This just lists the major product categories. The company offers the following product categories for navy and coastguard: From company website: PALFINGER NED-DECK can supply standardized and customized davit systems and cranes that meet the specific demands for Navy and Coast Guards vessels. PALFINGER NED-DECK is proud to be a supplier of life saving equipment and cranes to well respected leading Navy and Coast Guards around the world. Even offshore wind turbines need to transfer cargo. And Palfinger Ned-Deck provides cranes to help. From company website: PALFINGER WIND is the world´s leading manufacturer of cranes for the wind industry and the preferred supplier of onshore and offshore cranes for nacelles, platforms & transformer stations. PALFINGER WIND offers a complete lifting concept for the wind industry. It is based on a perfectly matched set of nacelle and platform cranes. This minimizes downtime for servicing and repair work, hub and blade inspection and the safe and fast unloading or hoisting of material and people. Our service concept is backed up by a worldwide service network. You can view more details of all the products on the company website: http://www.palfingerneddeck.com Palfinger Ned-Deck has several locations. See the company website for local contact details. Panasia manufactures a ballast water treatment system (BWTS) based on filtration and UV irradiation. They are distributed under the brand name GlOEn-Patrol(TM) From company website: GloEn-Patrol™ is a combined treatment system taking advantage of Filtration and UV irradiation, the most environmentally friendly and optimally designed solution for every kind of vessel to install and operate. Adopting a 100% physical treatment technology, GloEn-Patrol™ effectively disinfects harmful aquatic organism and pathogen in ballast water without producing any toxic substance during ballasting and de-ballasting. The ballast water treatment system consists of four key components. System capacities range from 50 to 6,000 m^3/hr. From company website: The ballast water enters through the inlet pipe into the filter and flows through the cylindrical filter element from inside out. The filtration cake accumulating on the element surface causes pressure difference to develop across the filter element. The back-flushing begins when the pre-set pressure difference between inlet and outlet on the filter is reached or pre-determined lapse of time is met. During the back-flushing cycle, the filtering is not interrupted and continues to flow downstream of the filter in the normal manner. From company website: Using UV light to disinfect water is a proven technology. This safe and effective physical disinfectant is suitable for both large and small applications. UV’s proven technology uses nothing but ultraviolet light to inactivate bacteria, viruses and other organisms that are present in the ballast water. The UV unit is easy to operate and needs no expensive and potentially hazardous chemicals. UV light, which continues to be reliable means of disinfection, involves exposing ballast water to irradiation from UV light. The treatment works properly because UV light penetrates an organism’s cell walls and disrupts its genetic material, making reproduction impossible. In addition, PANASIA’s GloEn-Patrol™ received ATEX certificate for explosion proof type so that the installation in hazardous area is possible. – Long life span UV lamp From company website: The monitoring & control panel is PLC (Programmable Logic Controller) based and configured to activate and deactivate UV lamps via UV power supply units In order to maintain the sufficient UV dose while conserving power. The monitoring & control panel offers a real time monitoring of the status of system operation while logging the data required by the convention at the same time. – Data logging for 24months From company website: The major function of UV Power Supply Panel is to operate the medium pressure lamps inside the UV chamber. It controls the strength of the UV lamp with the capacitors mounted on the Panel. Also It detects whether the UV lamps are functioning properly or not. The temperature sensor is mounted inside to monitor the temperature in order to give an alarm to an operator and shut down the system in case of emergency. You can learn more about the ballast water treatment systems from the company website: http://www.pan-asia.co.kr/english/02_business/ship.php You can find contact information for the local office from the company website and looking at the Web Catalog Service http://www.pan-asia.co.kr/english/catalog/GLOEN-PATROL%20V7_KOR.pdf HEAD OFFICE & FACTORY E-mail: panasia@worldpanasia.com Panel Specialists Inc offer fire-safe outfitting products for marine applications. Their main product is the fire rated marine board. It is a panel used for non-structural bulkheads that meets all requirements for fire protection regulations. In addition, they also offer marine furniture, also fire rated. From company website: Thermax marine boards are used for decorative fire rated walls, linings and ceilings in accommodation areas and public spaces on all types of seagoing vessels and offshore platforms. Thermax boards meet all relevant requirements for fire protection regulations according to SOLAS, which requires noncombustible construction materials in accordance with the FTP Code for interior outfitting and for furniture in certain areas. . . . Thermax boards are made from vermiculite (aluminum-iron-magnesium-silicate), a natural inorganic mineral belonging to the mica-minerals group. Raw vermiculite is exfoliated by a high temperature heat treatment in the production process and expands to a lightweight aggregate which is blended with inorganic binders and pressed to form boards. The boards also have a range of finishing options. From company website: Thermax non-combustible boards can be laminated with HPL’s, wood-veneers, wall coverings, paints, ceramic or marble tiles, stainless steel and aluminum sheets to meet the aesthetic requirements of the most demanding marine decorators, designers and architects. Rounded edges and all kinds of formed and curved panels are also possible with post-forming laminates, which are often used for public spaces on cruise ships and ferries. From company website: The StrongBox Design Team offers a complete furniture design service using latest design techniques including 3D modeling. Products include cabin furniture manufactured in steel, aluminum, aluminum honeycomb core and composites, in a product range of Beds, Bunk systems, Pullman Beds, Sofa-beds, Wardrobes, and Desks. You can learn more, with full details about all products, on the website: Thermax Panels: Strongbox Furniture: http://www.thermaxmarine.com/strongbox.shtml Contact us by sending an email to (sales@thermaxmarine.com) See the company website for local contact details. http://www.thermaxmarine.com/contact.shtml Panel Specialists, Inc. In 1928 Otto Piening, the founder of the company, opened an engine fitter’s shop for motorbikes in Glueckstadt. There he repaired his first propeller for a fisherman and – he stuck to that. At first the propellers were cast in Neumuenster, machined in Elmshorn and primed in Glueckstadt. In 1930 a bigger workshop including a lathe work department was opened. In 1952 the firm could expand again and the first propellers were cast in our own foundry. Today PIENING propellers and stern gears propel a variety of boats ranging from yachts, sport- and highspeed boats, inland vessels, fishing boats and motor coasters to passenger- and research vessels. Silence and smooth sailing, are requirements we pay special attention to in our design. Most modern computer programmes and methods of design are used to produce propellers with a maximum of efficiency. In our design we pay great attention to the efficiency of the propeller, a major factor in exploitation costs. Our stern gears meet with high requirements: Today PIENING stern gears propel a variety of boats ranging from yachts, sport- and highspeed boats, inland vessels, fishing boats and motor coasters to passenger- and research vessels. As cooperation partner and representative of ZF we offer propellers and stern gears as well as gearboxes for workships. Additionally, we provide the possibility to realise the optimum propeller efficiency considering the suitable gearbox. Our production enables manufacturing and delivery in short time limits and high quality. As far as propeller and mechanical engineering is concerned our scope of delivery includes complete propulsion units with fixed or variable pitch propellers. The latter are mainly cast from marine bronze or nickel-aluminium bronze. Our company is characterised by independence and excellent specialised staff. Certainly, we will be at your disposal for express repair of damaged propellers and blades at short notice. Furthermore, we provide a wide range of facilities for execution of various orders of industrial clients. Our departments foundry and turning shop produce: Our company is approved by all important classification societies. Repairs and capacity adaption are a main part of PIENING PROPELLER’s service. PIENING PROPELLER runs its own car pool to pick up damaged propellers, shaftings and rudder stocks from shipyards at any time if required. As well broken machine parts can be collected from industrial companies to be repaired professionally. Waiting times of ships and inactivity periods of machines can be reduced to a minimum. The dimensions of the repair parts are recorded before and after treatment to guarantee geometry at any time. Every maintenance and adaption is carried out professionally under precise observance of economical aspects and relevant instructions and regulations Promat makes fire protection and insulation. From company website: Promat is a leading manufacturer of passive fire protection panels and systems for marine applications, offering an extensive range of products designed to meet the most stringent of requirements of 21st century fire protection legislation. Promat offers certified systems for the following areas: Each system is fire-safe and composed of fire insulation to meet applicable fire regulations (SOLAS, USCG, etc.) All systems can be finished to be aesthetically pleasing. You can view full details about Promat’s product on their company website: If you want to to contact Promat, you can use the contact information form on the company website: http://www.promat-marine.com/contact.aspx?lng=en Rice Nozzles is a subsidiary of Rice Group. Founded more than 90 years ago, Rice Group was created for the manufacture and distribution of marine industry, metalmechanic products, agriculture equipment and services. Rice Nozzles was established in 1978, committed to build marine bronce propellers, nozzles and rudders systems. Rigidized metals provide textured and sandwich panel metals. Quote from Company website: Deep Textured Metals and Panels Since 1940, Rigidized® Metals Corporation has led the world in the development and production of deep-textured, three dimensional metals used in architectural, industrial and transportation applications. Rigidized® Metals products are known for their attractive, economical and functional appeal. The Rigidized® Metals deep-texturing process adds strength, impact resistance and the ability to hide scratches. It also allows for down-gauging, resulting in lighter, longer lasting products and reduced maintenance costs. Rigidized® Metals deep-textured metals are available in a wide palette of textures giving the kind of rich surface variation few materials can provide. We furnish our proprietary Rigidized® Metals deep textured metals to Service Centers and Original Equipment Manufacturers (OEM’s) of countless products around the world. Our patterns include the popular 5WL®, 6WL®, 6SL®, 6HC, 2WL®, RTP® and XTP . Rigidized metals also make honeycomb sandwich panels and tread plates. The advantage for these come in weight reduction. Anytime you have a flat plate, a rigid sandwich panel may be lighter and far simpler construction than a stiffened plate. They can’t be used everywhere. But when used in the right circumstances, rigidized metal can lead to significant savings in weight and construction cost. Rigidized metals have an extensive list of surface textures available. You can download a full set of product catalogs from their website. This includes. Find all the details you need in the company’s catalogs. The company has extensive catalogs and other details available on their website. You can find current contact information on the company website. Rolls-Royce provides an entire range of products that can supply an entire integrated machinery package for a vessel. They can offer the entire package integrated together, or individual components. Rolls-Royce offers a huge range of products. This tries to highlight the major categories. Components include: From company website: Our automation and control solutions comprise of a range of integrated systems and individual products suitable for virtually every vessel type. We start at the ship’s bridge and the human machine interface, with ergonomic control levers and joysticks, visual displays and alarms. Systems receive the commands from the bridge personnel, order the propulsion and other ship equipment to carry out these commands, verify that the machinery has responded and indicate the status of the various systems, for total control. Components include: From company website: Part of the Rolls-Royce Group, Michell Bearings is a premier designer and manufacturer of whitemetal (or babbitt) and PTFE-faced hydrodynamic bearings for a wide variety of marine and industrial applications. Rolls-Royce has a huge portfolio of deck machinery. This just lists some of the categories and suggests a few possible components. Not an exhaustive list by any means. It is more appropriate to list the various ship categories of ships that Rolls-Royce supplies deck machinery for. From company website: We are one of only a few suppliers worldwide to offer low-pressure hydraulic, high-pressure hydraulic and electric drive options within our modular winch portfolio enabling our systems to be closely matched to the requirements of the vessel. Ongoing product development will see the application of permanent magnet motor technology in the future. From company website: The Rolls-Royce electrical capability incorporates a wide portfolio of skills, products and competencies that range from electric propulsion systems design and supply to turnkey contracts for the supply of onboard electrical power distribution and control packages. Systems development activities are supported by state-of-the-art simulation and modelling capabilities. From company website: With a growing range of prime movers, we offer a complete range of marine gas turbines, diesels and gas engines that comply with today’s maritime standards. The latest developments from Rolls-Royce include the Bergen B32:40 and C25:33 diesels (which meet EPA Tier 2 emission regulations), the Bergen B35:40 gas engines and the powerful MT30. Rolls-Royce makes propulsors of every shape and type. From company website: Combined with a technology and skills base accumulated over 100 years, Rolls-Royce today has the broadest range of propulsion products, services and expertise in the world Typical applications: From company website: The Rolls-Royce gearbox range is based on the single-input single-output design with built-in clutch and thrustblock – and a wide variety of power-take-offs that enable large-shaft generators to be driven – and electric motors to feed power for get-you-home propulsion or as part of a hybrid propulsion system. A Syncrolift® system is simply a large elevator which raises and lowers vessels in and out of the water for dry-docking ashore. To dock a vessel, the platform and cradle are lowered into the water, and the vessel moved into place over the platform. When in position, the Syncrolift Dockmaster raises the platform, removing the vessel from the water. Work on the vessel can then be done in situ, or the vessel transferred ashore, leaving the Syncrolift available to dock other vessels. On completion, the process is reversed. From company website: Rolls-Royce supplies a complete range of manoeuvring and stabilisation products and systems for virtually any sized vessel. Our products are a result of our experience in ship technology and are developed in close co-operation with our customers. We provide a wide range of innovative and robust ship designs with integrated system solutions for the offsho When a pipe or cable goes through a bulkhead, it isn’t a simple task. The penetration must be reinforced and sealed to keep the bulkhead water and air tight. Enter Roxtec, who make bulkhead penetrations, for any size or configuration. From company website: The Roxtec sealing system is developed to protect life and assets. It is adaptable to cables and pipes of different sizes. Our certified solutions are used to ensure safety, efficiency and operational reliability in a wide range of projects worldwide. Although Roxtec makes a variety of products, they all are variations on the same concept: a flexible system for penetrations that easily adapts to any size pipe or cable. From company website: Multidiameter™ is our invention that brought adaptability and flexibility to modular-based seals. This unique solution is based on sealing modules with removable layers and ensures a perfect fit to different sizes of cables and pipes. This simplifies design, installation, and logistics. Avoid bad surprises on site with respect to quantity or size of cables, and reduce the need for tools and materials. Multidiameter™ makes it possible to seal most cables with just six basic sizes of modules. You can, in an area-efficient manner, seal multiple pre-terminated cables in one opening. You are always ready for future regulations and needs. If you want to add a pipe, just open up the transit, adapt a module, and reseal! You can find full details about the Roxtec system and product categories on the company website: Roxtec Inc To find a specific Roxtec location in the USA, follow this link: http://www.roxtec.com/us/contact/north-and-central-america/united-states/ RS supply is an electronics and mechanical product supplier. They offer a huge range of products. From company website: RS Components and Allied Electronics are the trading brands of Electrocomponents plc, the world’s leading high service distributor of electronics and maintenance products. With operations in 32 countries, we offer more than 550,000 products through the internet, catalogues and at trade counters to over one million customers, shipping more than 46,000 parcels on the same day the orders are received. Our products, sourced from 2,500 leading suppliers, include electronics, automation and control, test and measurement, electrical and mechanical components. The full list of products is available on the company website. This just covers the major categories. You can view full details of all products on the company website: The company provides full ordering capability directly through the website. Or they list the following contact information. RS Components Ltd Birchington Road Phone: +44 (0) 845 720 1201 Ryerson makes steel, stainless steel, aluminum, brass, and copper. They supply structural metals. Need to build a ship hull? Ryerson has the material. They also publish their stock list online. This helps designers to discover what materials are easily available. From company website: Ryerson gives metals the power of knowledge—real-world, far-reaching, flat-out smarts. The kind of knowledge that makes your operations more efficient. Makes your supply chain more predictable. And makes innovation more achievable. This is more than strength—it’s how metals perform. You can view the full stock list from Ryerson on their website: http://www.ryerson.com/en/Products/Stock-List This just lists the major product categories. You can find more details about Ryerson from their website: Ryerson has an online Customer Information Gateway: https://portal.ryerson.com/irj/portal You can also find contact information for your nearest branch location at this page of their website: Ryerson Corporate Office 227 W. Monroe St. – 27th Floor Chicago IL 60606 USA SafeRack makes loading cages for rail cars, truck trailers, and a whole range of other products. They specialize in fall protection and safety. Particular interest to the ship industry: They make erect-a-step(tm): a modular, easily configured system to build pipe cross-overs and other modular platforms. From company website: Providing you with tools and solutions to make your life easier is not something we take lightly. Our promise is that we will never cut corners when it comes to our products, or our relationship with you. That means designing loading rack solutions that keep your people safe and as productive as possible. It means doing everything within our power to help in your times of need, which will never include taking advantage of you with unnecessary fees. Because what we really build is trust. We build it by putting the people who use our racks first. We continually invest in and create technology that allows us to better meet the needs of our customers, and we never sotp looking for ways to improve our products and services. We are not looking for a medal; we just want your business and we want it for the long haul. You can find full details of all the products on the company website. This just lists the major product categories. You can also go directly to the Erect-A-Step product here: http://www.saferack.com/metal-crossover-stairs.cfm You can get full details for everything on the company website: To contact SafeRack, you can use the contact form on the company website, or the contact information listed here. Contact Information: http://www.saferack.com/contact.cfm Phone, Toll Free: +1 866 761 7225 Mailing Address P.O. Box 1678 Samson makes rope. Very strong rope rigging, maritime, arborist, and a host of other uses. When you need something very strong, Samson has a rope for you. Today, Samson is the worldwide leader in the development and manufacture of high-performance ropes with a focus on R&D and solving specific customer applications. You can view the full list of products on the company website. This just provides a summary of major product categories. You can view full details of all products on the company website: You can find full contact information on the company website: http://www.samsonrope.com/Pages/ContactUs.aspx Corporate Office Customer Service Schoellhorn-albrecht provides outfitting and deck machinery equipment. These range from standard catalog models all the way to custom designed items. From the company website: With over 120 years of experience, Schoellhorn-Albrecht is one of the leading designers and manufacturers of marine deck equipment, dock equipment, and vessel access systems. In addition to a standard product line, we also specialize in designing and manufacturing castings, fabrications, and specialized machinery. Due to our custom design and manufacturing capabilities, our products serve a variety of industries, including: marine, railroad, refinery, and military Products that we have designed and manufactured include: capstans, winches, mooring winches,anchor windlasses, tugger winches, anchors, deck fittings, bitts, chocks, cleats, mooring rings, hatches, kevels, roller chocks, roller fairleads, smit brackets, bollards, dock cleats, panama chocks, accommodation ladders, andgangways Schoellhorn-Albrecht makes several products, including the following: You can find the full list of products and a product catalog on their website: The company’s website is: http://www.schoellhorn-albrecht.com/ You can find ample product information on the website. You can find current contact information on the company website: http://www.schoellhorn-albrecht.com/contact.html Schoellhorn-Albrecht Machine Co., Inc. Schottel supplies propulsion and maneuvering systems. From company website: We are an innovative group of companies specializing in the development, design, production and marketing of azimuthing propulsion and manoeuvring systems, as well as complete propulsion systems with power ratings of up to 30 MW for vessels of all sizes and types. High product quality and a real commitment to local presence are the hallmarks of our success. A long tradition forms a major part of our corporate culture. With a high level of investment in research and development, we optimize our existing products and implement innovative system solutions. The goal of these activities is to improve still further the efficiency and reliability of all our propulsion and manoeuvring systems – for the benefit of our customers. Thanks to close cooperation with shipowners, yards, consultants and internationally renowned independent research establishments, we have been able to achieve this goal consistently. You can view full details of all products on the company website. This just highights the major products. From company website: For more than 50 years, the SCHOTTEL Navigator (NAV) has been a byword for a reliable and compact propulsion unit suitable for use on an extremely diverse range of vessels. In principle the NAV, an adaptation of the SCHOTTEL Rudderpropeller (SRP), is a largescale mobile outboard plant, providing the vessel with 360 degrees steerable manoeuvrability. SCHOTTEL Steering and Control Systems (SST) are tailored to each individual application. The spectrum extends from simple manually operated mechanical steering wheels on the propulsion unit itself to computer-aided, remote-controlled joystick systems. You can view full details of all Schottel’s products on their website: You can find contact details on the company website: http://www.schottel.de/contact/ ShibataFenderTeam offers customized fender solutions for high quality rubber fenders. Application engineering is provided by our in-house sales engineers. Providing safety critical rubber fender systems, ShibataFenderTeam has a strong focus on producing all major components in-house ensuring highest quality and reliability. We are committed to providing support and assistance during commissioning and throughout the service life of the fender system. All ShibataFenderTeam products are designed, manufactured and tested in accordance with PIANC guidelines Shibata have offices in North America, Europe, and Asia. Their main office is in Asia. You can find detailed contact information for your nearest office on their website. https://www.shibata-fender.team/en/contact.html High performance rubber fender systems for various applications, typically in areas with low variation in water level. Fixed Fenders are mostly equipped with steel panels to allow for a low hull pressure. High performance rubber fender systems for various applications with the focus on projects with high variations in water levels and for cruise terminals. Other foam products are used as navigational aids and security barriers. High performance fender systems for various applications with the focus on projects with high variations in water levels and ship-to-ship operations. Fender systems to protect exposed corners against ship damages and to facilitate safe turning manoevres. Fender systems especially suitable to provide ship guidance in narrow areas. A wide range of types and performances is available to suit almost all project requirements. Simple rubber profiles for various applications that can be manufactured in almost any lengths. Supplied cut and drilled for easy and quick installation. Resilient rubber fenders with an UHMW-PE front facing plate allowing for low friction. Extremely robust fender types for heavy-duty and demanding tug boat operations. SilvaGrip makes non skid solutions. Their non skid products assert that they have much longer wear time than conventional non skid applications. Description from the company website: The harder the material, the longer it will last. When molten aluminum blends with ceramic and oxygen it creates a very tough material with a rough surface profile. Our Silvagrip surface is expected to last seven to ten years and beyond. This Aluminum/Ceramic blend is a patented product used in Silvagrip as a patent pending anti-skid peel and stick surface. We have tested the shear strength of this adhesive per the Navy milspec MIL-PRF-24667, Type XI. A one inch square piece of adhesive is applied to a stainless steel vertical surface. Then, a ten pound weight is secured to the sample. It must hold for one minute per the mil-spec. Silvagrip’s adhesive stayed secure for over an hour until finally taken down. The adhesive, we use, is the same adhesive used on motor vehicle thresholds, emblems, components in engine compartments and inside door frames. This adhesive outlasts the life of the vehicle. Metal encapsulated abrasive particles are more durable than polymers or epoxy. . . . When metal decks contract and expand, the foam core adhesive used in Silvagrip expands and contracts with the metal decking, thus eliminating the potential of cracks, chips and delamination, such as you get with traditional epoxy and grit. You can learn more on the company website: http://www.silvanonskidsolutions.com/ 2310 South Dock St. You can also use the contact form online, here: Skookum offers rigging tackle. From company website: Established in 1890 as a family business, Skookum was purchased by the Ulven family in 1986. Located in Hubbard, Oregon, our comprehensive block, fairlead, sheave, hook, and alloy forging lines have met the challenges of the most demanding applications around the world. We’ve proudly taken part in the shaping of American industry from salvage operations at Pearl Harbor and construction of the Grand Coulee dam to San Francisco’s BART system. Serving the logging, maritime, mining, commercial fishing, petroleum, military, and offshore industries, Skookum sets the standard. You can find the full list of products on Skookum’s website. This is just a summary. From company website: Skookum manufactures cast sided blocks for a variety of uses: logging, commercial fishing, mining, dredging, heavy construction, military, and utility. Also manufactured are plate sided blocks for commercial trawl blocks, diamond and oval pattern hoisting blocks for construction, and plate side snatch blocks for military use. Custom blocks are manufactured to meet specific customer needs and requirements. Manganese and cast steel wire rope sheaves are in stock from 4″ to 47″ diameter. Skookum also fabricates custom sheaves of high strength steel plates and machines them to the exact dimensions as required by the customer. Along with Skookum’s standard fairleads and lead sheaves, we also manufacture custom products for the end user. You can learn more on the company website: http://www.ulvencompanies.com/skookum.html 6160 Whiskey Hill Road Toll Free: 1-800-547-8211 Email: skookum@ulvencompanies.com The companies in the Stone Marine Group are among the world’s leaders in the design, manufacture, service and repair of propulsion equipment. A position they have occupied for nearly 200 years since Josiah Stone developed his design for a screw propeller. Today the Group companies design and manufacture propellers and sterngear for vessels of every type and size, commercial, naval and leisure, whilst specialist companies within the Group service and repair propulsion equipment regardless of the company that manufactured it. Our service and repair company, Stone Marine Shipcare is operational worldwide 24 hours a day 365 days of the year. Their recently introduced mobile workshops mean they can now get, not just their engineers but also the highly advanced equipment necessary for propeller repairs and modifications, to ports all over the world very quickly. Zhenjiang Supersoar Marine machinery Co.,ltd is located in High-tech industrial park, Jinkou district, Zhenjiang City, Jiangsu province, China. It is a subsidiary of Zhenjiang Supersoar international trading Co.,Ltd. We have our own shareholding professional marine propeller manufacturing with the first class equipment and material testing system. The factory area is above 20000 square meters. Our main products includes different size from 0.6 meter to 7 meters, the weight of single propeller less than 20tons marine propeller, with the material bronze, carbon steel, and stainless steel. Our company has been approved by the class society of CCS, ABS, BV, GL, KR, RINA etc. and ISO 9001 quality management system and passed the military product testing. After many years development, our company also co-operated with other high quality products factories, especially propulsion system, shafting system, rudder system, thrusters, marine steering gear,windlass, winch, cranes, anchor& chain. Room 201 Building 1 Zhenjiang Jiangsu China Techcrane International, LLC provides marine cranes. The company includes drawings of their cranes on the website, in PDF format. Techcrane provides the following types of marine cranes: They also provide hydraulic power systems. You can find more information on the company website, here: http://techcrane.com TechCrane International, LLC 17639 Hard Hat Dr. Covington, LA 70435 U.S.A. Phone: +1 (985) 871-0056 Fax: +1 (985) 871-0065 Thordon bearings manufacturers bearings for propellers, rudders, and deck equipment. Every bearing functions completely free of grease or oil of any king. Essentially, they have a line of thermoset polymers that are impregnated with oil on the microscopic level. The bearing is self lubricating. Some of the bearings use water for heat dissipation. (The materials are also compatible with oil and grease if you truly feel compelled.) Thordon makes bearings for the following applications. Thordon sells their bearings through a distributor network. You can find the closest distributor through their website: http://www.thordonbearings.com/ The distributor list is on the right side of the screen. Direct contact information for Thordon Bearings below. Ken Ogle 3225 Mainway, Burlington, Ontario, L7M 1A6, Canda Tel: +1 905 335 1440 ext 264 Fax: +1 905 335 4033 email: keno@thordonbearings.com Thrustmaster makes thrusters, and other products related to vessel maneuvering and control. From company website: Thrustmaster of Texas, Inc. manufactures heavy duty commercial marine propulsion and thrusters. The factory and production of all thrusters is based out of Houston, Texas with a global network of sales offices in Rotterdam, Singapore, China, Dubai, and Brazil. A service office is located in Houma, Louisiana to assist offshore clients. All thrusters are developed in-house by a complete engineering department for mechanical, hydraulic, electrical and electronic design. Tooling includes machining and measuring equipment, CAD, vessel resistance and propulsion, 3D modeling and ANSYS Finite Element Analysis. The application of modal analysis, stress and strain analysis as well as rotor dynamic analysis of drive trains and transmissions are fundamentals towards the reliability and quality of Thrustmaster’s products. What types of thrusters do you want? Thrustmaster makes several thrusters, and related products: 360° rotating Azimuth thrusters are used when enhanced maneuver- ability is required in applications such as dynamic positioning, ship escort and ship docking services. Quick dock-side conversion of any vessel to DP-0 thru DP-3 per any of the major classification societies. Outdrive units are self contained thruster packages for main propulsion and positioning of barges, platforms and river craft. Thrustmaster retractable thrusters are thru-hull azimuthing thrusters using fixed pitch propellers at variable speed. Axial flow water jets from 100kW to 6,400 kW available in 15 model sizes to accomodate vessels from 6m to +60m with stainless steel jets supported by electronic controls. Tunnel thrusters for docking, slow speed maneuvering, emergency steering and station keeping at zero or slow forward speed. You can find information about all their products on their website: You can find the latest contact information on the company website: http://www.thrustmaster.net/contact-us/ Phone Number – 713-987-4265 Thrustmaster of Texas Valence is a brand of batteries, manufactured by Lithiumwerks. They are based on lithium iron magnesium phosphate (LiFeMgPO4) technology. The company emphasizes the safety of their battery technology over lithium-ion batteries. LiFeMgPO4 cells under puncture or short circuit conditions are much less likely to experience thermal runaway than (for example) Lithium metal oxide. The Exponent testing report, which compares selected lithium-ion battery chemistries. The batteries have the following environmental features. A range of 12, 24, 18 & 36V Lithium Iron Magnesium Phosphate battery modules comprising advanced energy storage chemistry for economic and environment focused automotive, marine, UPS and industrial applications. Specially designed to enable comprehensive U-Charge® module implementation options offering excellent scalability. Advanced software allows multiple command and control functions and compatibility to diagnostics equipment and user terminals. Module diagnostics and data logging peripherals for communication and interpretation directly using a PC. You can find more information on the company website: Full contact details are available here: http://www.valence.com/contact Valence Technology Call: 1-888-VALENCE Phone: 512-527-2900 Valence Technology Phone: +44 (0)28 9084 5400 Phone: 1-888-VALENCE | 512-527-2900 Vicinay Cadenas manufactures high quality mooring accessories providing a wide variety to the industry and solutions which can be tailor made for a specific project, D-type Shackles, Offshore Shackles, Plates, Sockets, Kenter Shackles, LLLC links, ROV Kits, etc.) of various qualities and in a range of sizes (from 100 Kgs up to 3500 Kgs). Vicinay is best known for manufacturing mooring chain for the offshore industry. Vryhof is the trusted partner to most offshore industry’s leaders, delivering innovative and customer-focused anchoring and mooring solutions. We are committed to the highest standards of safety and integrity. We are proud of our legacy and impeccable track record over the last 45 years, always delivering value in everything we do. The anchor manual is a very popular introduction to anchoring. Vryhof Anchors provides drag anchors and related mooring equipment for larger floating structures, to the offshore energy industries as well as for offshore civil applications. Since the foundation of the company in the early seventies, Vryhof’s proven and trusted anchor designs have become the industry standard and are regarded as being best in both performance and handling. With primary focus on customer satisfaction, Vryhof Anchors is the preferred partner for mooring systems in all water depths and conditions. The Stevin anchor was the original anchor design of Vryhof Anchors at its inception, outperforming all existing anchors at the time. Although initially designed for the dredging industry it has served numerous applications during its life time. The Stevin design has actually been replaced by later Vryhof Anchors anchor designs, however is still available. For more information contact Vryhof Anchors sales department. Introduced in 1993, the Stevpris Mk5 was the anchor the world was waiting for and very quickly became the most used drag anchor for larger mobile and permanent moorings, primarily because of its principal qualities. At the time it had the best per kilo performance, generating up to 50 times its own weight in holding capacity proved suitable for all soil conditions. Still today over 2200 anchors of this type are in use and supplied new to newbuild semi-submersible rigs or permanent installations. An adapted version of the Stevpris Mk5, called ‘ Stevshark’, facilitates performance in hard soils such as limestone, calcarenite, very dense sands and coral. It has identical inherent qualities to the Stevpris Mk5, and its modifications include a stronger construction, shark teeth, sharp fluke edges and fluke tips. Optionally the hollow fluke can be ballasted to assist initial penetration. The anchor’s geometry provides an extreme high weight/strength ratio, a property that is visible through its robust and sleek design. The fluke shape minimizes soil disturbance during penetration; its enlarged surface provides the huge holding power. The fluke width provides stability both on the seabed and during penetration. The Stevpris Mk6 provides holding power that is well in excess of 30% higher than that of any other existing drag anchor today. The Stevmanta Vertical Loaded Anchor (VLA) was designed to allow uplift at the anchor point, which is required in semi-taut or taut leg mooring systems. The Stevmanta installs as a normal drag embedment anchor but the patented angle adjuster system changes the anchor from installation mode to mooring mode, resulting in an instant 3,5 factor of increase in holding capacity. It is the most cost efficient, lightest and smallest deepwater anchor available in the market today and since its introduction in 1996 hundreds of permanent and mobile moorings have been succssfully performed worldwide. Wartsila offers a huge range of products for vessels: engines; ballast water management systems; oil separation; . . . the list goes on. From company website: Wärtsilä is passionate about optimising lifecycle value There is a huge list of products on the Wartsila website, with extensive details. This list just highlights the major categories. Wartsila has full detail of all their products on the company website: Wartsila has contact offices all over the world. Check the company website for the nearest contact: Wavefoil has developed retractable bow foils that provide significant fuel savings, reduced motions and a more comfortable experience at sea. Combining a smart retraction mechanism with the use of light but strong composite materials, Wavefoil is bringing wave propulsion to the market. It has been known for over 150 years that vessels with wings – or foils – in the bow can be partly or solely propelled by wave energy. The foils generate lift when the vessel is moving up and down in waves, and the lift typically has a forward thrust component larger than the drag. Put simply, wave power is directly converted into propulsive power. A vessel in waves experiences additional resistance compared to calm-water operation. For wave lengths similar to the hull length, this additional resistance will be amplified due to resonance, implying large heave and pitch motions. Wavefoil’s retractable bow foils dampen these motions so that the additional resistance decreases. So how much fuel can you save? That depends on the ship, its speed, the foil size and location and the wave conditions. For a 100 m long ship operating in a wave-rich area, with constant brake power equivalent to a calm-water speed of 14 knots, research shows that an average fuel saving on the order of 20% can be achieved. Lower brake power gives higher percentage fuel saving. Fuel savings are not the only benefit of bow foils. Increased comfort, reduced vibrations, less spray, increased operability and the ability to maintain higher speeds in waves for a given power are some other perspectives. The Wolfson Unit has a long history of working in towing tanks and other physical experimentation methods. The Wolfson Unit was founded in 1967 to enable industry to benefit from the facilities, academic excellence and research activities at the University, predominantly through model testing and consultancy. The Unit is comprised of full time professional engineers, we offer competitive consultancy rates and meet the tight schedules of commercial projects. Other University staff can be called upon when additional expertise from other disciplines will benefit a particular project. This unique situation has enabled us to build a reputation for technical excellence and independence which is valued by our established clients and respected by organisations who invite our engineers to sit on advisory and regulatory committees. In recognition of our long standing service to the small craft industry, we’re proud to have been awarded The Royal Institution of Naval Architects 2012 Small Craft Group Medal. We are best known for ship model testing, sailing yacht performance and ship design software, but our expertise extends to many other aspects of marine technology and industrial aerodynamics, details of which can be found on other pages here. Wolfson Unit MTIA Building 185 Southampton SO16 7QF United KingdomAalco
AalcoNotes
Products
Materials
Structural Shapes
Website
Contact Information
ABB
ABBNotes
Products
Website
Contact
Sales
AEG Industrial Engineering
AEG Industrial EngineeringNotes
Electric Drives / Motors
> Synchronous and asynchronous motors > DC motors > Starter units to limit the start up current of large motors > Converters for DC motors > Converters and inverters for low voltage and medium voltage motors > Revamping and modernizing of drives > Drives and thyristorized equipment with highly dynamic properties > Drive solutions with special technologies for the steel industry > Controlled drives for sugar centrifuges > Drives for conveyor belts > Drives for pumps and fans > System solutions for compressors also in explosive atmospheres and flameproof operational conditions. Alaskan Copper and Brass
Alaskan Copper and BrassNotes
Products
Aluminum
Stainless steel
Brass / bronze
Copper
Copper-nickel
Outlets / valves
Fabricated items
Website
Contact Information
Kent (Head Office)
Kent, Washington 98032
Phone (206) 623-5800
Toll Free (800) 552-7661
Sales Fax (253) 796-2771
acbsea@alaskancopper.com
Kent Map/DirectionsPortland
Portland, Oregon, 97208-5067
2440 Southeast Raymond (97202-4638)
Phone (503) 238-7171
Toll Free (800) 552-7661
Fax (503) 238-6849
acbpdx@alaskancopper.com
Portland Map/DirectionsSan Diego
Chula Vista, California 91912
1333 30th Street, Suite A
San Diego, California, 92154-3404
Phone (619) 423-2546
Fax (619) 423-5310
acbsan@alaskancopper.com
San Diego Map/DirectionsVancouver, B.C.
Coquitlam, B.C., Canada V3K 3V7
Phone (604) 937-6620
Toll Free (800) 667-5456
Fax (604) 937-0838
acbvcr@alaskancopper.com
Vancouver Map/DirectionsAlfa Laval
Alfa LavalNotes
Products
Heat Transfer
Separation
Fluid Handling
Take precision control of fluid transport and regulation for exceptional hygiene and efficiency. Solutions for pumping fluids of any viscosity, quick cleaning and intelligent, automated control.
Website
Contacts
Align
AlignSMART AutomationNotes
Products
SMARTChief® II Alarm & Monitoring System
SMARTLink™
The SMARTChief® Power Management System
SMARTChief® Tank Level Management
Website
Contact
NO-5430 Bremnes
Norway
Fax: +47 53 42 88 01
WEB: http://www.smartchief.noAnixter
AnixterNotes
Website
Contact Information
ASCO (Aluminum Supply Company)
ASCO (Aluminum Supply Company)Notes
Taken from: http://www.aluminumsupply.com/index.php%5B/caption%5D
Products
Website
Contact
Regular Phone: +1 (313) 491-5040
Fax: +1 (313) 491-6380Ballast Technologies Inc
Ballast Technologies IncNotes
What is Perma Ballast
THE PERMA BALLAST® GLOBAL ADVANTAGE
THE PERMA BALLAST® PROCESS
Ballast-Crete
Ballast-CreteContact: Robert ChesterNotes
Product
Website
Contact
Beacon Finland
Beacon FinlandNotes
Products
Website
Contact
Home Office Contact
PO Box 228
FIN-26101 Rauma
Finland
or
Ms. Tuija Hörkkö
Fax: +358 2 8387 9510
Email: beacon@beaconfinland.comStreet address: Valtakatu 9-11 26100 RAUMA Finland Bergen Marine Systems
Bergen Marine SystemsNotes
Products
Website
Contact
Bosch-Rexroth
Bosch-RexrothWave GeneratoNotes
Products and Solutions
Wave generator solutions
Wave generation system hardware
Maximum wave height
Bruce Anchor
Bruce AnchorNotes
Products
OMNI-DIRECTIONAL DENNLA
FFTS MK4
FFTS PM
dimensions marked *FFTS GP
dimensions marked *Carlsen Group
Carlsen GroupNotes
Products
Double Reloader System
Screw Conveyor System
Source: http://www.carlsengroup.com/products/screw-conveyor-system/%5B/caption%5D
E3 Cargo System
Conveyor Loading System
To accommodate for pneumatic loading of material from shore into the ship
To facilitate for loading by road trucks or rail cars into the ship
To arrange for cargo to be widely spread into the ship’ss cargo holdWebsite
Contact
Van Polanenweg 2
NL-2921 LT Krimpen aan de IJssel
The Netherlands
Fax: +31 180 516 064
Email: info@carlsengroup.comCathelco
CathelcoNotes
Products
Their product range includes marine pipework anti-fouling (AF) systems and impressed current cathodic protection (ICCP) systems to safeguard the hulls of commercial and naval vessels against corrosion. Cathelco Seafresh specialises in the production of reverse osmosis desalinators (watermakers) for yachts, commercial and naval vessels.The offshore energy sector continues to gain in importance
Impressed Cathodic Current Protection
Website
Contact
Dunston Road
Chesterfield S41 8NY
United KingdomCen-Tex Marine
Cen-Tex MarineNotes
Products
Website
Contact
1100 N.E. 1st Street
Smithville, Tx. 78957
MWB@Centexmarine.com
GERALD@Centexmarine.com
ABLACKWELL@Centexmarine.comCIP Composites
CIP CompositesContact: Mary CrommettNotes
Columbia Winch and Hoist
Columbia Winch and HoistNotes
Products
Strap Drum Conversions
Website
Contact
Beaverton OR 97008
Phone: 503.626.0654
Toll free: 800.248.4896
Fax: 503.646.1996Comap Controls
Comap ControlsNotes
Product Sample
Contact Information
Competition Composites
Competition CompositesNotes
Marine Rudders
Spars, Rudder Posts, and Tubes
Composite Tillers
Corvus Energy
Corvus EnergyNotes
Products
Energy Storage module
Website
Contact Information
Richmond, BC V6V 2A2
Canada
Phone: (604) 227-0280
Toll Free: (888) 390-7239
Fax: (604) 227-0281
24 Hour Support: (604) 227-1932
USA
Phone: (206) 673-4606
Toll Free: (888) 390-7239
Fax: (604) 227-0281
24 Hour Support: (604) 227-1932
13a A.J Marinho Drive
Victoria Island
Lagos, Nigeria
Phone: 234 1 4603370-1
Fax: 234 1 4616221
24 Hour Support: (604) 227-1932
Email: aakindolie@corvus-energy.com
Website: http://www.corvus-energy.com/africa
Tuas, Singapore
637601
Phone: +65 6862 1643
Fax: +65 6862 1641
24 Hour Support: (604) 227-1932Cospolich
CospolichNotes
Products
Website
Contact
Destrehan, LA 70047
Norco, LA 70047Coventive Composites
Coventive CompositesNotes
Products
Website
Contact
Address
Bridge Way
Chesterfield
S41 9QG
United KingdomTelephone
Fax
Website
Email
Crosby
CrosbyNotes
Products
Website
Contact
Deansteel
DeansteelNotes
Products
Website
Contact
Deansteel Manufacturing Company, Inc.
931 S. Flores Street
San Antonio, Texas 78204
Phone: 210-226-8271
Fax: 210-226-0913
Toll Free: 800-825-8271
E-Mail: sales@deansteel.comDiab
DiabNotes
Products
Website
Contact
Diamond Sea Glaze Windows
Diamond Sea Glaze WindowsNotes
Products
Yacht and Pleasure Closures
Commercial Marine
Custom Glass Products
Website
Contact
26995 Gloucester Way
Langley, B.C.
V4W 3Y3 Canada
Toll Free: 1-800-770-0455
Fax: (604) 607-0092Discflow
DiscflowNotes
DISC PUMP TECHNOLOGY
ADVANTAGES OVER CENTRIFUGAL AND PC PUMPS
Products
Horizontal Pumps
Submersible Pumps
Sump and Dry Pit Pumps
ANSI Disc Pumps
Cantilever Disc Pumps
Sanitary Pumps
API-610 Pumps
Glass Lined Pumps
Website
Contact
Name Position Phone Discflo Corporation +1-619-596-3181 Max Gurth President/CEO +1-800-DISCFLO Xochitl Aguirre General Manager +1-800-DISCFLO Gustavo Martinez Sales Manager +1-800-DISCFLO Vincent Moore Quality Assurance Manager +1-800-DISCFLO Mark Garrison Production Manager +1-800-DISCFLO Eaton: Crouse-Hinds
Eaton: Crouse-HindsNotes
Products
Website
Contact
Global HQ Contact
Syracuse, NY 13208
FAX: +1 (315) 477-5179
crouse.customerctr@cooperindustries.comEdinburgh Designs
Edinburgh DesignsNotes
World Leading Hydrodynamic Test Equipment
Our Approach
Examples of Edinburgh Designs Projects:
Energy Focus
Energy FocusNotes
Products
Website
Contact
Exlar
ExlarNotes
Products
Source: http://www.exlar.com/%5B/caption%5D
Website
Contact
Galley Design and Sales
Galley Design and SalesNotes
Source: http://www.restaurantdesignandsales.com/Areas_of_Expertise/Marine_&_Yacht_Galleys/%5B/caption%5D
Vendor Contact
G A L L E Y D E S I G N & S A L E S
Bellevue, WA 98005
Office: (425) 881-1010
Cell: (520) 631-8324GE Transportation
GE TransportationNotes
Products
L250 Marine Engine
V250 Marine Engine
V228 Marine Engine
Marine Parts & Services
Website
Contact
GMT Composites
GMT CompositesNotes
Why Use GMT
Products
Website
Contact
david@gmtcomposites.com
cathy@gmtcomposites.com
Bristol, RI 02809 USA
T:401.253.8802
F:401.253.9395
Find us on MapquestGolden Gate Zero Emission Marine
Golden Gate Zero Emission MarineContact: John MotlowNotes
Notes
Plus, check out our clearance items and products on sale.Products
Services
Auto-Reorder
Emergency Services
Grainger Lighting Services
Inventory Management – KeepStock(c)
Online Purchasing Solutions
Online Purchasing Solutions.Product Services
Find MRO
Safety Services
Paperless Invoicing
Website
Contact
Gurit Composites (USA)
Gurit Composites (USA)Notes
Products
Website
Contact
Halton Marine
Halton MarineNotes
SOLUTIONS
Products
Marine and Offshore Products
Marine and offshore dampers
HVAC Product Lines
Kitchen Ventilation
Air Filtration
Website
Contact
Hamilton Jet
Hamilton JetGeneral Manager – California, USA & CanadaContact: Tom LathamNotes
Products
HJ Series Waterjets
HM Series Waterjets
HamiltonJet HT Series Waterjets
Electronic Waterjet & Vessel Control Systems
Website
Contact
Harding
HardingNotes
Products
Website
Contact
Hawboldt Industries / Timberland Group
Hawboldt Industries / Timberland GroupNotes
A century of leadership in marine equipment solutions
Products
Website
Contact
Chester, Nova Scotia, Canada B0J 1J0
Tel: (902) 275-3591 Fax: (902) 275-5014Hilti
HiltiNotes
Products
X-BT Fastening System
Source: https://www.us.hilti.com/%5B/caption%5D
Channel Systems
Source: https://www.us.hilti.com/%5B/caption%5D
Website
Contact
HR Wallingford
HR WallingfordWavemaker Design and ManufactureNotes
Description of HR Wallingford Wavemakers
Innovation in wave generation
Hundested Propellers
Hundested PropellersNotes
Completed Controllable Pitch Propulsion Systems for Commercial Vessels and Superyachts
Controllable Pitch Propellers (CPP)
Marine Gearboxes
Made-to-order products
Pitch Control Units
This system has many advantages:
Low Resistance Propulsion Systems
Power supply and layout
Propeller orientation
Regeneration
Motoring
Maneuvering
Hyde Marine
Hyde MarineNotes
Hydraquip
HydraquipNotes
Products
Service and Repair
Website
Contact
In-Mar Systems
In-Mar SystemsNotes
Products
Fire Fighting Systems (FFS)
Nijhuis
Triplex AS
Wynn Marine
• Quick and easy installation – reducing costs
• 2 speed operation with self parking
• Intermittent wipe available dependant upon selected controller
• De-icing heaters in arms an option for cold weather operation
• Spray nozzles available in arms for efficient flow of fesh water
• Inward facing drive as standard; outward facing drive an optionWebsite
Contact
In-Mar Solutions, LLC
3011 S. Ruby Ave.
Gonzales, LA 70737
Phone: (225) 644-7063
Fax: (225) 644-7046
Email: info@inmarsystems.comIntelligent Engineering
Intelligent EngineeringNotes
Products
Website
Contact
Intercon
InterconNotes
Products
Commercial Marine
Products
Services
Heavy Industry
Services
Defense
Products
Subcontract Manufacturing
Services
Website
Contact
INTERCON Corporate Offices
E-mail: info@intercon.com Telephone: (816) 741-0700 or (800) 821-3182 Facsimile: (816) 741-5232 Mail: PO Box 9055
Kansas City, MO 64168 USADelivery: 1000 NW Intercon Drive
Riverside, MO 64150 USAInternational Paint / AkzoNobel
International Paint / AkzoNobelNotes
Products
Website
Contact
Jastram Engineering
Jastram EngineeringNotes
Products
Model B Steering Gear
actuator size can be selected.Model S Steering Gear
Helm Pump
Hydraulic Power Unit
Website
Contact
Fax: 1-604-986-0334
Email: marketing@jastram.com
Postal address: 135 West Riverside Drive, North Vancouver, British Columbia, Canada V7H1T6 | Copyright © 2010 Jastram Engineering LtdJefa Rudder
Jefa RudderNotes
Jefa Marine Products
Ruder Stocks
Rudder Blades
Roller Bearings
Rudder Sealing Systems
Rudder Locking Rings
Rudder Tiller Heads
Rudder Washers
Rudder Deck Covers
Rudder Sleeves
Rudder Emergency Tiller
Jefa Steering Systems
Jefa Steering SystemsNotes
Welcome to Jefa Steering
Jotun Marine Paint
Jotun Marine PaintContact: Jeff AshlockNotes
Products
Marine Coatings
Powder Coatings
Konsberg Maritime
Konsberg MaritimeNotes
Business activities
Market sectors
Products
Main product areas
Other Maritime or Oil & Gas related products
Website
Contact
Ladish Valves
Ladish ValvesNotes
Products
Website
Contact
Aaron Distefano – Production Manager – adistefano@ladishvalves.com
Todd Haberkost – QA and Support Services – thaberkost@ladishvalves.com
Toby Tinelli – Sales Representative – ttinelli@ladishvalves.com
Alicia Lara – Office Manager – alara@ladishvalves.comMachinery Mounting Solutions
Machinery Mounting SolutionsNotes
Comparison to Other Mechanical Chocks
Website
Contact Information
Mark Morner
Markey Machinery
Markey MachineryNotes
Products
Services
Website
Contact
Seattle, WA 98108Maxim
MaximNotes
For routine maintenance of our heat recovery evaporators, we offer a line of thermal distillation cleaning solutions. MAX-Defense is used to prevent scale formation and fouling and is designed to be used in the chemical feed system. It is environmentally compatible and NSF approved under ANSI Standard 60 for drinking water applications. MAX-Descaler is designed to dissolve and remove scale. MAX-Control is designed to prevent corrosion that can occur as the result of acid cleanings. All of our cleaning solutions are non-hazardous.
Products
Heat Recovery Evaporators
Reverse Osmosis Watermakers
Cleaning Solutions
Website
Contact
Lucky Rich
Ph: 318-629-2461
Fax: 318-629-2465
Gail Lindsey
Ph: 318-629-2460
Monica Rogers
Ph: 318-629-2460
Fax: 318-629-2465McMaster-Carr
McMaster-CarrNotes
Products
Website
Contacts
McNichols
McNicholsNotes
Products
Product Lines
Trade Name
Website
Contact
Customer Support
Michigan Wheel Corporation
Michigan Wheel CorporationNotes
Products
Michigan Propellers
Federal Propellers
Commercial Propellers
HyTorq Propellers
Hale MRI
Why select an MRI Repair facility?
Sterngear
Aqualube
Website
Contact
World Headquarters
Grand Rapids, MI 49507
Phone: (616) 452-6941
Fax: (616) 247-0227Michigan Marine Propulsion – International
Pottery Road
Kingsteignton, Newton Abbott
Devon, England TQ12 3BN
Phone: + 44 1626 351723
Fax: + 44 1626 351724
E-mail: sales@mmp-i.com
Web: http://www.mmp-i.comMichigan Marine Propulsion – Dubai
Dubai Airport Free Zone
P.O. Box 54805
Dubai
UAE
Phone: + 971 4 2045425/6/7/8
Fax: + 971 4 2045429
E-mail: sreekumar@mmp-i.com
Web: http://www.mmp-i.comMuir Winches
Muir WinchesNotes
Products
Pleasure Range
Mega Range
Commercial Range
Website
Contact
TASMANIA – HEAD OFFICE
International Tel: +61 (03) 62 290600 International Fax +61 (03) 62 297030 Email: sales@muir.com.au Web: http://www.muir.com.au N.E.I. Treatment Systems
N.E.I. Treatment SystemsNotes
IMO Compliance AND A Compelling Return on Investment!
Products
Website
Contact
249 E. Ocean Blvd., Suite 500
Long Beach, CA 90802
U.S.A.
F +1 562-983-9709
E info@nei-marine.comNational Hardware
National HardwareNotes
Products
Website
Contact
Newthex
NewthexNotes
Why Newthex
Newthex is experienced in the delivery of certificated products. Extensive paperwork for quality systems is handled efficiently.
Newthex doors, hatches and elevators are easy to handle, reliable, durable, require low maintenance and are delivered turnkey and in time.
The employees of Newthex have a no nonsense attitude and do their utmost to establish long lasting pleasurable relationships.
With our ISO 9001:2015 and ISO 14001:2015 certifications we always aim to improve our environmental performance while keeping a systematic and consistent approach for meeting your objectives.Olympic Drives
Olympic DrivesBiography
Notes
Palfinger Marine
Palfinger MarineNotes
Products
Marine and Offshore
Davit Products
Crane Products
Training Schools
Winches
Navy and Coastguard
Wind
Website
Contact
Panasia
PanasiaNotes
Products
Filter Unit
– Removing large organisms over 50㎛
– Rising UV light transmission
– Low pressure drop
– Automatic back flushing
– Screen size : 50㎛
– Capacity : 50 ~ 6,000㎥/hr
– Max. operating Pressure : 10 kg/㎠
– Explosion proof type(Option)UV Unit
– Disinfection of micro-organism
– Easy maintenance and operation
– Automatic cleaning wiper
– Capacity : 50 ~ 6,000㎥/hr
– Max. operating Pressure : 10 kg/㎠
– Explosion proof type(Option)Control Panel
– Main data display (Pressure, flow, Temp., etc)
– Alarm
– Controller : SIEMENS PLC
– Human Machine interface system
– Touch ScreenPower Supply Panel
Website
Contact
Panel Specialists Inc
Panel Specialists IncNotes
Products
Thermax Marine Panels
Strongbox Fire Rated Furniture
Website
Contact
Information Request
Phone: +1 (800) 947-9422 or +1 (254) 774-9800Sales Contact
11 N. Dearborn Street
Mobile, AL 36602-1712Piening Propellers
Piening PropellersNotes
Propellers
Stern Gears
ZF-Propulsion
Propulsion Manufacturing
Propeller Repairs
Promat
PromatNotes
Products
Website
Contact
Rice Nozzles
Rice NozzlesSalesContact: Edgar ReyesNotes
Products
Rigidized Metals Corporation
Rigidized Metals CorporationNotes
Products
Website
Contact
Factory and Main Offices
Telephone (toll free) General Inquiries 800-836-2580 General Inquiries 716-849-4760 Fax 716-849-0401 Email (general questions & comments) Contact Us Mailing & Manufacturing Address 658 Ohio Street, Buffalo, NY 14203 Business Hours 8:00am to 5:00pm EST Accounting 716-849-4777 Shipping/ Receiving 716-849-4784 Human Resources/ Resumes hr@rigidized.com Website Comments 716-849-4766 Sales and Technical Support
Elevators, Partitions, Marine, Furniture, Appliances, Walk In Coolers
Dick Friedman dickfriedman@rigidized.com Brian Whalen 716-849-4707 brianwhalen@rigidized.com Truck Bodies, Trailers, Aircraft and Industrial/Food Processing Components
Chris Russ chrisruss@rigidized.com Susanne Pohle 716-849-4702 susannepohle@rigidized.com Drew Ferraro drewferraro@rigidized.com Architectural and Transit
Kevin Porteus kevinporteus@rigidized.com Dave Miske 716-849-4703 davemiske@rigidized.com Cindy Sawyer cindysawyer@rigidized.com Rolls Royce
Rolls RoyceNotes
Products
Automation and control
Bearings and Seals
Deck Machinery Solutions
Power Electric Systems
Engines
Propulsors
Reduction Gears
Syncrolift Shiplifts and Transfer Systems
How does the Syncrolift system work?
Stabilizing and Maneuvering Systems
Ship Design and Systems
Roxtex
RoxtexNotes
Products
All Cables and Pipes are Welcome
Built-in spare capacity for upgrades
Website
Contact
10127 E.Admiral Place,
74116 Tulsa, OK, United States
Phone:+1 800 520 4769, 918 254 98 72
Fax:+1 918 254 2544
Email: info@us.roxtec.comRS Supply
RS SupplyNotes
Products
Electronics Components, Power and Connectors
Electrical, Automation and Cables
Mechanical Products and Tools
IT, Test and Safety Equipment
Website
Contact
Corby, Northants
NN17 9RS
UKRyerson Steel
Ryerson SteelNotes
Products
Website
Contact
SafeRack
SafeRackNotes
Products
Website
Contact
Phone, Direct/Canada: +1 803 774 7225
Fax: +1 803 774 7233
Sumter, SC 29151Samson Rope
Samson RopeNotes
Products
Website
Contact
2090 Thornton St
Ferndale, WA USA 98248
Tel: 360-384-4669
1-800-227-7673 (ROPE)
Fax: 360.384.0572 or
800-299-9246
custserv@samsonrope.comSchoelhorn-Albrecht
Schoelhorn-AlbrechtNotes
Products
Website
Contact
1141 Reco Ave
St. Louis, MO 63126Phone: 314-965-3339 Fax: 314-965-3341 Schottel
SchottelNotes
We know what moves ships
Products
NAV Navigator
SST Steering Systems
Website
Contact
Shibata Fender Team
Shibata Fender TeamNotes
Contact
Products
Fixed Fenders.
Foam Products.
Pneumatic Fenders.
Corner Fenders.
Rolling Fenders.
Extruded Fenders
Komposite Fenders.
Tug Boat Fenders.
ShibataFenderTeam offers the complete range of Tug Boat Fenders for all kinds of applications.Silvagrip
SilvagripNotes
Products
Website
Contact
Bldg. A Suite 101
Palmetto,FL 34221Skookum
SkookumNotes
Products
Blocks
Cast and Fabricated Sheaves
Fairlead and Lead Sheaves
Website
Contact
PO Box 280
Hubbard, OR 97032 USA
Phone: (503) 651-3175
Fax: (503) 651-3409Stone Marine Propulsion Limited
Stone Marine Propulsion LimitedContact: Adrian MilesNotes
Supersoar Marine Propeller
Supersoar Marine PropellerContact: Zoe ZhangNotes
Products
TechCrane
TechCraneNotes
File available at: http://techcrane.com/%5B/caption%5D
Products
Website
Contact Information
Thordon Bearings
Thordon BearingsNotes
Advantages
Products
Purchase
Contact
Thordon Bearings Inc.
3225 Mainway
Burlington, ON L7M 1A6
Canada
Fax: +1.905.335.4033Regional Contacts
Pacific Northwest, USA
Thrustmaster
ThrustmasterNotes
Products
Azimuthing Thrusters
Portable Dynamic Positioning
Outdrive Propulsion Units
Rectractable Thrusters
Water Jets
Tunnel Thrusters
Website
Contact
Thrustmaster Headquarters
Fax Number – 713-937-7962
6900 Thrustmaster Drive
Houston, TX 77041
USAValence / LithiumWerks
Valence / LithiumWerksNotes
Products
Battery Modules
Battery Management System
Peripherals
Company Website
Contact Information
Corporate Headquarters
Austin, TX, USA – Corporate Headquarters
12303 Technology Blvd.
Suite 950
Austin, Texas 78727
Fax: 512-527-2910Europe/Asia Pacific Sales
Mallusk, N. Ireland – EMEA Sales Office
Unit 63 Mallusk Enterprise Park
Mallusk Drive,
Mallusk, Newtownabbey
Co. Antrim,
Northern Ireland
BT36 4GN
Fax: +44 (0)28 9083 8912Technical Support
or International: +44 (0)28 9084 5400Vicinay
VicinayNotes
Offshore Mooring Chain
Vryhof
VryhofNotes
Anchor Manual
Vryhof Anchor Products
Stevin Mk3
Stevpris Mk5
It proved easy to handle, easy to install, easy to retrieve.Stevshark Mk5
Stevpris Mk6
Stevmanta VLA
The advantages of using the Stevmanta VLAs in a mooring spread are clear;
Wartsila
WartsilaNotes
by offering whatever its customers in the marine industry need
from the most complete offering
of marine products, integrated solutions and servicesProducts
Website
Contact
Wärtsilä Corporation
Street Address
John Stenbergin ranta 2
FI-00530 Helsinki
FinlandPost Address
P.O. Box 196
FI-00530 Helsinki
FinlandWavefoil
WavefoilNotes
EXPLOITING THE POTENTIAL OF WAVE ENERGY
Wolfson Unit
Wolfson UnitNotes
Towing tank services
About Us