Carlsen GroupCarlsen GroupWork Van Polanenweg 2 Krimpen aan de IJssel NL-2921 LT The NetherlandsworkCompany Phone: ‘+31 180 440 720homeWork Fax: ‘+31 180 516 064workfaxWork Email: firstname.lastname@example.orgINTERNETWebsite: Company Website
Carlsen provides equipment and engineering services for bulk material handling. Cement, sand, and even grains. Carlsen has the equipment to efficiently and safely unload it.
Carlsen offers a variety of different systems for bulk cargo handling. Which system to select can depend on many things: efficiency, the specific cargo to handle, safety. Carlsen representatives can help you select the best system for your purposes. All text taken from Carlsen website. (http://www.carlsengroup.com)
Double Reloader System
The D.R. (Double Reloader) system consists of two tanks that alternate between being filled by vacuum and emptied by pressure. When the first reloader tank is full, the vacuum valve closes, and the vacuum valve to the second tank open. The second tank is then filled while at the same time the first tank is emptied to recieving silos by means of compressed air. In this way a nearly continous conveying process is achieved.
Screw Conveyor System
The Carlsen mechanical system uses screw conveyors for vertical conveying and airslides or horizontal screw conveyors for horizontal converying The holds are equipped with fluidized bottoms. The material flows from the fluidized bottom through a flow control gate into a vertical screw converyor. From the vertical screw conveyor on deck to the centre of the ship. The material is conveyed on shore either by a mechanical unloading boom or by a pneumatic pressure system.
E3 Cargo System
The Carlsen E3 Cargo System provides almost continous unloading to shore, it is utilizing the pressure from compressors and direct feeding from the hold to the blow tanks. The advantage is that the system uses only one conveyor from cargo hold to silo.
Conveyor Loading System
All the Conveyor Loading systems (Air slide Loading System & Screw Conveyor Loading System) can be provided with the following options.
- Option: Pneumatic Loading with Cyclone
To accommodate for pneumatic loading of material from shore into the ship
- Option: Truck Loading
To facilitate for loading by road trucks or rail cars into the ship
- Option: Air slides below Main Deck
To arrange for cargo to be widely spread into the ship’ss cargo hold
You can find more information on the company website:
Detailed contact information can be found on the company website:
Van Polanenweg 2
NL-2921 LT Krimpen aan de IJssel
Phone: +31 180 440 720
Fax: +31 180 516 064
CathelcoCathelcoWork Marine House Dunston Road Chesterfield S41 8NY United KingdomworkCompany Phone: ‘+44 (0)1246 457900homeWork Fax: ‘+44 (0)1246 457901workfaxWork Email: email@example.comINTERNETWebsite: Company Website
Cathelco provides impressed current systems to prevent corrosion of hull plating, pipework antifouling, and a variety of other products.
The following description comes from Cathelco’s website (http://www.cathelco.com)
Cathelco are world leading designers and manufacturers of equipment for ships and offshore installations.
Their product range includes marine pipework anti-fouling (AF) systems and impressed current cathodic protection (ICCP) systems to safeguard the hulls of commercial and naval vessels against corrosion. Cathelco Seafresh specialises in the production of reverse osmosis desalinators (watermakers) for yachts, commercial and naval vessels.The offshore energy sector continues to gain in importance
Cathelco supply AF and ICCP systems for offshore platforms, semi-submersibles, FPSOs and FSOs. In the renewable energy market they have developed advanced ICCP systems to protect monopile, jacket and tripod offshore wind turbines.
After considerable research and development, Cathelco are planning to launch a unique ballast water treatment (BWT) system in 2013 based on a combination of filtration and UV sterilisation.
Cathelco are represented globally through a network of agent/installers.
Impressed Cathodic Current Protection
Although modern hull coatings provide some protection against corrosion they do not offer a complete solution. For this reason, most operators choose to protect their vessels with a purpose designed impressed current cathodic protection system.
Using an arrangement of hull mounted anodes and reference cells connected to a control panel(s), the system produces a more powerful external current to suppress the natural electro-chemical activity on the wetted surface of the hull.
This eliminates the formation of aggressive corrosion cells on the surface of plates and avoids the problems which can exist where dissimilar metals are introduced through welding or brought into proximity by other components such as propellers.
An essential feature of ICCP systems is that they constantly monitor the electrical potential at the seawater/hull interface and carefully adjust the output to the anodes in relation to this. Therefore, the system is much more effective and reliable than sacrificial anode systems where the level of protection is unknown and uncontrollable.
Cathelco has ample samples and useful information on their website:
You can find detailed contact information for Cathelco on the company website.
Chesterfield S41 8NY
+44 (0)1246 457900
+44 (0)1246 457901
Cen-Tex MarineCen-Tex MarineWork Cen-Tex Marine Fab. 1100 N.E. 1st Street Smithville TX 78957 USAworkCompany Phone: ‘+1 512 237 2496homeWork Fax: ‘+1 512 237 3257workfaxWork Email: MWB@Centexmarine.comINTERNETWebsite: Company Website
Cen-Tex marine creates watertight closures. We need to keep the water out somehow, and Cen-Tex has solutions for you.
From company website:
Cen-Tex Marine has become one of the most respected manufacturers of marine closures. Well-trained craftsmen operating excellent machinery, are dedicated to providing high quality watertight doors, hatches, scuttles, manholes and portlights. Cen-Tex products can be found on all size vessels, from the smallest work boat to the largest supertanker, and on many offshore drilling rigs.
Our closure line features many variations of watertight and weathertight doors: individually dogged, quick acting (handwheel or lever operated), dutch doors, and double doors–all available in virtually any size.
Hatches, scuttles and manholes are also available in many configurations and sizes–raised or flush, individually dogged, quick acting, spring balanced, etc. We are equipped to fabricate custom closures when needed. We have portlights and fixed lights ranging from 8″ to 18″, with covers and screens optional, as required.
The full product catalog is on the company website. This just lists the major categories.
- Fixed Lights
- Cargo Hatches
You can find more information on the company website:
Address: Cen-Tex Marine Fab.
1100 N.E. 1st Street
Smithville, Tx. 78957
Phone: (512) 237-2496
Fax: (512) 237-3257
E-MAIL: MARINE CLOSURES
CIP CompositesCIP CompositesContact: Mary CrommettWork 29538 Airport Rd, Unit A Eugene OR 97402 USAworkCompany Phone: ‘+1 888 999 1835homeCell Phone: ‘+1 541 255 9915cellDirect Phone: ‘+1 541 607 3655workWork Email: firstname.lastname@example.orgINTERNETWebsite: Company Website
CIP Composites offer design engineers an attractive, cost effective alternative to the traditional materials used for bushings, bearings, wear pads, and thrust washers, such as bronze or nylon. CIP Composites are only 1/6 the weight of steel, easily machined, have good dimensional stability and do not contain harmful or toxic materials.
Columbia Industrial Products (CIP) is dedicated to providing you with the highest quality composite bearing materials in conjunction with superior customer service. CIP is committed to building sustainable relationships that you can rely on. From quick quotes to short lead times, we are a custom manufacturing house in business specifically to serve and solve bearing and wearing challenges. We build honest personal relationships that start from the first inquiry and extend beyond the shipment of the order.
We believe…our success depends on your success.
For the last 22 years we have been manufacturing self-lubricating composite bearings and wear material for the marine, hydro, and other industrial markets. For the last 22 years we have been manufacturing self-lubricating composite bearings and wear material for the marine, hydro, and other industrial markets. In marine our parts service everything below the water line – stern tubes, rudders, fin stabilizers and thrusters. Above the water line it’s the bearings for deck equipment- tow pins, winches, fairlead rollers, hatch covers, actuators & doors . We are well known for our fast lead times, ability to produce some of the largest sizes in the industry, and our personalized customer service. If for some reason your email blocks you from opening attachments you can also see our catalog and application pages on the website linked above.
Columbia Winch and HoistColumbia Winch and HoistWork 6590 SW Fallbrook Place Beaverton OR 97008 USAworkCompany Phone: ‘+1 503 626 0654homeWork Fax: ‘+1 503 646 1996workfaxWork Email: email@example.comINTERNETWebsite: Company Website
Columbia Winch and Hoist creates small to medium sized winches for material handling. Think of moving a large engine block around the shop floor. Columbia products are manufactured by Allied Power Products, Inc. (http://www.alliedpower.com)
Columbia Winch and Hoist offers a variety of products.
- AC Electric Hoists (Lifting)
- Capacities from 2000 lbs to 15,000 lbs
- AC Electric Winches (Pulling)
- Capacities from 2000 lbs to 40,000 lbs
- Pneumatic Hoists (Lifting)
- Capacities from 2000 lbs to 15,000 lbs
- Pneumatic Winches (Pulling)
- Capacities from 2700 lbs to 40,000 lbs
- Hammerhead trolleys
- Manual overhead trolleys
- Other Products and Options
- AutoAdvance line spoolers
- Davit cranes
- Lead sheaves
- Strap drum conversions
- Custom units
Strap Drum Conversions
A load strap drum option is offered for every standard model of Columbia winch and hoist. With hoist capacities to 5,600 lbs. and winch capacities to 11,000 lbs., Columbia strap drum models provide versatile load handling capability while eliminating the inherent disadvantages of wire rope or chain.
In addition to being easier to handle, inspect and install, straps eliminate load rotation problems associated with wire rope and chain. Unlike wire rope, straps wind smoothly without long lead distances to the drum. Straps do not require lubrication nor do they “jagger”, chip or spark.
For line pull and line speed performance, refer to the appropriate Columbia winch or hoist technical specification sheet.
You can find more details about Columbia Winch and Hoist on their website:
6590 SW Fallbrook Place
Beaverton OR 97008
Toll free: 800.248.4896
Email: Internet form: http://www.columbiawinch.com/contact.html
Comap ControlsComap ControlsWork ComAp a.s. U Uranie 1612/14a Prague 7 170 00 Czech RepublicworkCompany Phone: ‘+420 246 012 111homeWork Email: firstname.lastname@example.orgINTERNETWebsite: Company Website
ComAp manufacturers control systems for gensets, pumps, and propulsion engines. The number of features you get from their small boxes is really quite remarkable. You can also got the company website and download the configuration software for their boxes for free. Gives you a chance to play around and see what the control system is capable of before purchasing. The software does not require a link to the box to function.
You can see the full list of products on the company website. (Link provided in contact information.) This description is an example of the features you can expect from a ComAp system. This is for the base control unit on their InteliGen NTC genset controller.
InteliGen NTC BaseBox is a comprehensive gen-set controller for both single and multiple gensets operating in standby or paralleling modes. The detachable modular construction allows easy installation with the potential for many different extension modules designed to suit individual customer requirements.
To be used in conjunction with detachable colour displays InteliVision 5 or InteliVision 8
Support of engines with ECU (Electronic Control Unit)
Complete integrated gen-set solution and signal sharing via CAN bus – minimum external components needed
Many communication options – easy remote supervising and servicingAutomatic synchronizing and power control (via speed governor or ECU)
- Airgate support, Ethernet connection (RJ45), USB 2.0 slave interface, 1× RS232 / 2× RS485 interface with Modbus protocol support; Analog / GSM / ISDN / CDMA modem communication support; SMS messages; ECU Modbus interface; secondary RS485 converter is isolated
AMF function, Baseload, Import / Export, Peak shaving, Voltage and PF control (AVR)
Generator measurement: U, I, Hz, kW, kVAr, kVA, PF, kWh, kVAhr
Mains measurement: U, I, Hz, kW, kVAr, PF
Selectable measurement ranges for AC voltages and currents – 120 / 277 V, 0–1 / 0–5 A
Inputs and outputs configurable for various customer needs
Bipolar binary outputs – possibility to use BO as High or Low side switch
Event-based history (up to 1000 records) with customer-selectable list of stored values; RTC; statistic values
Integrated PLC programmable functions
Integrated fixed and configurable protections
Customized firmware solution
Main company website:
ComAp works through a network of distributors. You can find their distributors listed here:
For direct contact with ComAp, go here:
Competition CompositesCompetition CompositesWork 251 5th Ave Arnprior Ontario K7S 3M3 CandaworkCompany Phone: +1 613 599 6951homeWork Email: email@example.comINTERNETWebsite: https://cci.one
Competition Composites Inc. (CCI) has been serving the global sailing and composites communities since 2002. From our early beginnings as Phil’s Foils marine products, we have expanded to offer design and fabrication services across many fields of composites application. CCI offers quality and reliable products and services you can count on, from one-off custom development to short run production. Our friendly and professional staff are here to answer any questions you may have about your needs, our company or our services. CCI is ISO 9001:2015 Certified and Controlled Goods Certified.
We have been designing and building marine foils and products since 2002 as Phil’s Foils. We have hundreds of satisfied and repeat customers and our products are race and regatta winners around the globe. We have an extensive design portfolio addressing many popular classes of multi-hulls, keel boats and dinghies, but if you don’t see what you need, we also offer comprehensive design and construction services and advice.
Spars, Rudder Posts, and Tubes
CCI has always been an innovator, and now we are turning our attention to building high quality structural tubes using our proprietary processes. Usually in carbon fiber, but we can work with other materials as well.
In 2014 we added autoclave capability to our shop, with a 12″ diameter, 20′ long heated pressure vessel.
Our composite tillers are something quite special as they are light, strong and look the part too. We can design and build to your exact specification, and here are some examples of work already done.
CospolichCospolichWork P.O. Box 1206 Destrehan LA 70047 USAworkCompany Phone: ‘+1 985 725 0222homeWork Fax: ‘+1 985 725 1564workfaxWork Email: firstname.lastname@example.orgINTERNETWebsite: Company Website
Ships don’t run on diesel alone. They need a crew, and that crew needs food. And that food needs a galley for preparation. Cospolich makes galley equipment.
From company website:
- We are a manufacturing company utilizing the latest technology to streamline our production processes.
- We have expanded our product line and capabilities ten-fold.
- The material management and control software that we have in place provides state-of-the-art programming and process monitoring capabilities.
- We have around-the-clock production of high quality laser-cut parts.
- We utilize proven methods that emphasize efficiency without sacrificing quality.
You can view the full line of products on the company website. This just lists the major categories.
- Chest refrigerators and freezers
- Combination units
- Hot proofing cabinets
- Stainless steel galley fabrication
- Undercounter units
- Optional accessories
- Cold food counters and wells
- Dual temp serving line and modules
- Hot food counters and wells
- Modular walk-in coolers and freezers
- Thaw cabinets
- Walk-in doors
You can find more information on the company website:
- Mailing Address
- P.O. Box 1206
Destrehan, LA 70047
- Telephone: 985.725.0222
- FAX: 985.725.1564
- E-mail: email@example.com
- Shipping Address:
- 14695 U.S. 61
Norco, LA 70047
Coventive CompositesCoventive CompositesWork 4a Broom Business Park Bridge Way Chesterfield S41 9QG United KingdomworkCompany Phone: ‘+44 124 626 6240homeWork Fax: ‘+44 124 626 6249workfaxWork Email: firstname.lastname@example.orgINTERNETWebsite: Company Website
This post specifically focuses on a material called Aptiform, by NetComposites. Aptiform provides a different type of structural composite material. Aptiform uses self-reinforced plastics. The major advantage is that these composites are recyclable, unlike many traditional composite materials.
Product description, from Aptiform website:
The Aptiform moulding process has been specifically developed for the efficient manufacture of components from self-reinforced plastics, based on the results of extensive development work undertaken by NetComposites in collaboration with leading industrial companies and universities.
The unique forming process allows OEMs to benefit from the light weight, recyclability, high impact performance and low cost offered by self-reinforced plastics – a family of materials with both fibre and matrix made from the same polymer. These materials offer a unique balance of properties and cost, particularly suited to radio transparencies and ballistic components.
The family of materials includes self-reinforced polypropylene and PET, with developments currently being made in polyamides and polyethylene. Specific strength and stiffness are approximately equal to glass-reinforced polymers, whilst properties such as impact performance and radio-transparency far exceed conventional materials.
We’re currently involved in component manufacture and product development in aerospace, defence, personal protective equipment, leisure craft, luggage and low volume automotive. The material benefits exploited by these sectors are radar/radio transparency, high impact performance/ballistic properties, weight and recyclability.
The Aptiform moulding technique is based on the results of extensive development work undertaken in collaboration with customers and materials suppliers, and there are only a handful of companies worldwide that have the ability to form this family of materials.
Aptiform is a brand of NetComposites.
More information about Aptiform can be found at the website:
4a Broom Business Park
CrosbyCrosbyWork 2801 Dawson Rd Tulsa OK 74110 USAworkCompany Phone: ‘+1 800 772 1500homeWork Fax: ‘+1 918 832 0940workfaxWebsite: Company Website
Think lifting, heavy lifting, and rigging in general. Sheaves, hooks, shackles, etc. If it involves a crane or any type of lifting, Crosby probably has something that you need.
From company website:
The Crosby Group was conceived with a long range goal to develop into a single source for accessories used in the lifting and material handling industry with the highest levels of quality control available. Through a creative program of product development and aggressive acquisitions of market-leading lines, Crosby began its growth. The current experience level of our employees has been many years in the making.
The company has a very large catalog of products. Too many to list them all here. Here are just some of their categories:
- Wire rope end fittings
- Sling saver fittings
- Hooks and swivels
- Rigging accessories
- Chain and accessories
- McKissick sheaves
- McKissick blocks
- Western & Marine blocks
- Crosby lifting clamps
- Crosby trawlex(r)
- Crosby kuplex(r)
- Special products
- Rigging information
You can view the entire catalog here:
Crosby has plenty of details, including their full catalog and drawings of their products, on their website:
You can locate a sales manager from the Crosby website: